What mode does tp link TL-WR700N 150M mini wireless router use when staying in a hotel? I use touch to surf the internet, and there is no computer.

AP mode can make use of the wireless coverage function of equipment to provide wireless extended access for traditional wired LAN.

In router mode, it is equivalent to a wireless router, with wired port as WAN port and wireless as LAN, so that multiple wireless clients can enjoy a broadband line to surf the Internet.

The repeater mode uses the wireless relay function of the equipment to relay and amplify the wireless signal, forming a new wireless coverage area, and finally achieving the purpose of expanding the wireless network coverage.

Bridging mode solves the problems of signal difference, data transmission rate can not meet the needs of users, and even signal blind spots when using a single wireless AP for wireless network coverage.

Client client mode, also known as "master-slave mode". The AP working in this mode is the wireless client of the main AP, which is equivalent to the wireless network card.

The DHCP server of TL-WR700N is turned off by default, and the computer needs to manually configure the IP address before logging into the management interface of the device. If there are multiple DHCP servers in the network, it may cause the computers in the network to get the wrong network address, which may lead to the inability to access the Internet. The factory default of TL-WR700N is AP mode. In order to avoid the above problems, the factory default DHCP server of the equipment is closed. Therefore, if you need to access the management page192.168.1.253 of TL-WR700N, you must manually configure the IP address for your touch:192.168.1.

If you don't mind others using your wireless, you don't have to go to the page setup. If you mind, you should put it in safe mode.