Leak detection of tap water pipeline

1. First of all, we can check the water leakage of tap water pipeline from the comparison between environmental investigation method and pressure test method. In general, the environmental investigation method is a relatively intuitive detection method, and we can judge the water leakage point of the tap water pipeline according to the tap water pipe network diagram and the field situation. 2. You can also check whether there is water leakage at the water pipe joint. Generally, when the street is aging, the water pipe leaks. 3. Judging from the material of water pipes, inferior materials are prone to water leakage.

Suggested solutions are:

If there is water leakage, turn off the water supply first and then turn on the connection switch. If there is water leakage, it should be caused by improper handling of the silk mouth. You can re-wind the string with a new thread.

You can change the material of the water pipe. Usually, the material of water pipes has a certain service life. If the service life is too long, it will age and leak.

When the water pipe joint is exposed to the sun for a long time, some cracks will appear, resulting in water leakage. At this time, choosing some good quality materials for wrapping will solve the problem of water leakage and prolong the service life of water pipes.

Where there is a water pipe, avoid squeezing it with a car or a heavy object, so as not to break the water pipe and cause water leakage.