Traditional Culture Encyclopedia - Hotel franchise - The simplest decoration method of blank house

The simplest decoration method of blank house

The simplest decoration method of blank house

The simplest way to decorate a rough house. Now people buy houses from developers, mostly rough houses, without decoration. When the owner took the key, he saw that it was bare and was at a loss. The following is the simplest decoration method for rough houses.

The simplest decoration method for rough houses 1 1, water and electricity

If you want to move in quickly, you can simply decorate the blank room. First of all, install water and electricity to be waterproof. As water, electricity and waterproofing are concealed works, it will be more troublesome to maintain them in the future. It is recommended to buy brand-name products, so that the quality is more guaranteed.

2, the ground

It is recommended to choose tiles for the ground, which is more convenient for later cleaning and faster for floor laying. It is not recommended to buy floor leather. Although it is cheap, it has a high benzene content and a strong smell, which is not conducive to human health. If you don't want to lay tiles, laying carpets directly is also a very quick way and makes your home look more classy.

Step 3: walls

Now it's popular to go back to basics. In fact, it is also very fashionable to leave the cement surface directly on the wall. If you are worried that the wall is too simple, you might as well buy more emotional decorative paintings to decorate it and instantly improve your home taste.

4, lamps and lanterns lighting

Lamps and lanterns are mainly lighting, and ceiling lamps are directly installed, which is beautiful and elegant, and it is also convenient to clean and maintain in the later period.

Step 5 choose furniture

Furniture is as simple as possible, so it is more natural and environmentally friendly to choose the material of logs. The use of hue pays attention to the sense of wholeness. Try to give priority to with light colors, which can make the space look more comfortable.

6. Storage method

If you are worried that it is too much trouble to make finished cabinets, you might as well buy some ready-made cabinets for storage. For example, buying cloth wardrobe in the bedroom is cheap and can be used at any time. You can buy some beautiful plastic cabinets in the living room to place small objects, which is more convenient to find. You can hang some shelves on the wall and put some trinkets to increase happiness.

The simplest decoration method of blank room 2 How to decorate blank room?

How to decorate a blank room Steps to decorate a blank room (1) Tools are in place and ready.

Before decorating, you must prepare a few things and put them in your bag. 5M tape measure, calculator, big board clamp (for bills and receipts), old towel (one soft cotton, for wiping after sticking bricks), and plastic bag (wrapped around the pipe joint to prevent dirt from blocking).

How to decorate the blank room? Steps to decorate a rough house (2) Choose a good day.

Before the workers enter the site, they should personally measure the corner of the house, write it down with a pen ruler and mark it clearly. Don't be lazy. The contents of the measurement mainly include:

1. Define the areas involved in the renovation process. It is tile area, wall paint area, wallpaper area and floor area;

2, clear the bearing wall size. It is the wall size that needs to be designed for furniture in the future.

How to decorate the blank room? Renovation steps of rough house (3) main body demolition and transformation

The demolition and reconstruction of the main body is the first project, which mainly includes wall demolition, wall building, wall skin, heating, plastic steel windows and so on. Remove the garbage in time to ensure the cleanliness of the room, but also for the convenience of construction.

At this point, it's time to set up the finished door, and then browse the cabinets, range hoods, cookers and water heaters, and make sure.

How to decorate the blank room? Steps to decorate the rough house (4) Hydropower transformation, and arrange the use of each space.

Hydropower transformation, no regret medicine to eat. Bricks are stuck on the wall and the ceiling is sealed, so it is difficult to add another socket. So be sure to locate the switches, lights, basins, bathtubs, washing machines and so on.

Before the hydropower transformation, the cabinet designer should take measurements at home to help you determine the transformation scheme of power supply and waterway. It's best to send someone to design the position of power supply and interface according to the model you have determined.

Air conditioning holes and power supply should be placed on the wall of the bedside as far as possible to avoid air conditioning blowing directly at people in the future. Keep a distance of 20 cm between the strong and weak points, such as a distance of 20 cm between the socket and the network cable.

How to decorate the blank room? Step (5) of decorating the blank house: shrink the pipeline.

Considering the humid environment of kitchen and bathroom, wooden keel must not be used as the material of riser! Everyone must be careful, even if the wooden keel is painted with antirust paint.

Remember, the vertical pipe is made of light steel keel or red brick. Light steel keel saves space, but red brick is strong and easy to use.

At this time, you need to buy tiles, jointing agents and so on. Furniture should be set in advance, and the construction period should be kept well, generally at least 15 days.

How to decorate the blank room? Blank room decoration step (6) Tile.

Buy a floor drain before sticking bricks.

Note: buy a special washing machine or shower floor drain to deodorize.

After waterproof napping, we are ready to stick bricks.

In addition to the normal precautions for sticking tiles, the tiles are soaked in water and dried in the shade; In addition to cutting broken tiles, I personally emphasize the overall beauty of tiling. Simply put, the width of the brick on the wall should not be less than 10 cm. This often happens when sticking bricks. For example, the wall width is 1 m, the brick is 32*32cm, and the normal pasting method is 3 whole 1. But 32×3=96, to reserve 1 cm tick-off space, the remaining small bricks can only be pasted 3cm wide.

As long as you make it clear to the bricklayer in advance, the width of the brick on the wall should not be less than 10 cm. He can cut bricks on both sides. Let's take a wall just 1 meter wide as an example, and it becomes 2 whole and 2 small. 32×2=64, reserved 1 cm for jointing, and the small bricks on both sides are 17.5cm, so that it looks not only symmetrical on both sides, but also the whole wall will not be narrow there.

How to decorate the blank room? Step 7: Oil workers go into battle.

If you don't buy a finished door, let the worker master do it.

Note: Any carpentry work, even if it is just a pass, must follow this step, the big core board sinks to the bottom, and the veneer is painted again. When mixing oil, irresponsible workers are lazy and brush oil directly on the big core board, which is absolutely wrong. Don't believe the story of selling big core boards. It is no problem to brush oil directly on them. Remember, brush the oil directly, and it won't take long for it to crack completely, remember to remember.

How to decorate the blank room? Step 8) Paste the wallpaper.

Wallpaper is much better than wall painting.

After the wall paint is painted, the oil trade union paints nitrocellulose paint where wallpaper needs to be pasted. The paint can be dried thoroughly the next day, and then the master is invited to paste the wallpaper.

Note: Do not open the window for ventilation within 48 hours after the wallpaper is pasted, and let it dry slowly in the shade. Tell the master that if something gets stuck, you should ask him to help repair it.

At this time, it is time to buy panels, sockets and lamps.

How to decorate the blank room? Blank room decoration step (9) Install the socket panel

The socket panel can be installed in about half a day.

1, the socket with switch function is easy to buy, especially in the kitchen, you can control the rice cooker and microwave oven without plugging in the power supply.

2. Although the socket with switch is good, we should pay attention to practicality. According to my observation, all three sockets of the five-hole power supply with switch are flat. Once your electrical appliance needs three round sockets, there will be the depression of using plug-in boards when the sockets are empty. Therefore, multi-purpose sockets must be used, even if it has no switch control!

The above is all about how to decorate the blank house and the sharing and introduction of the decoration steps of the blank house. I hope I can help you. If you have any other information about home improvement, please visit the website.

The simplest decoration method of blank house 3. How to decorate a blank house is better? Decoration skills of rough houses.

1, determine the size of the house.

Before the renovation of the blank house, according to your own contract, actually measure the area of the whole house, the actual use area, the most important thing is the area of floor tiles and wall tiles, the area where the room should be wallpaper, and so on. , and recorded in detail.

2. The rough design of the house

According to the layout of the room, I first have a design plan for the house, what to do on which side and how to transform it.

3, the transformation of the main structure

Let's see which one belongs to the load-bearing wall and cannot be rebuilt. Then we'll see where the walls can be demolished and rebuilt and where the walls can be built. There is also water heating, how to change underground water pipes and how to change existing heating pipes, all of which should be planned reasonably. Finally, all the rubbish in the room should be removed to facilitate decoration.

4, change the electricity

Reforming the circuit in the room is a very important link and must be carefully designed. Leave several sockets in the room, which socket is ready for what purpose, and the specific location of the socket must be designed. Because the floor tiles are paved and the ceiling is finished, it is very complicated and troublesome to change the circuit.

5. Tiles

Buy some good quality tiles. Before sticking bricks, you must do waterproof work, especially in the bathroom and floor drain. If the bathroom is not waterproof, the painted wall is easy to peel.

6. Paint the wall or paste wallpaper

The next thing to do is to paint the wall, and then paint it. Paint should be environmentally friendly, and formaldehyde should not exceed the standard, otherwise it will be harmful to the body. Now many families will choose wallpaper. There are many kinds of wallpaper. Sticking on the wall is much better than painting. The wallpaper is easy to fall off after being pasted. Be sure to wait for 48 hours before opening the window for ventilation.

7. Ceiling

Ceiling includes kitchen, bathroom, balcony, bedroom and living room. Kitchen and bathroom are particularly important, so be careful because of their special functions. The bathroom should be equipped with exhaust fan, yuba and water heater.

8. Installation of cabinets and gas stoves

After the installation of kitchen ceiling is completed, the next step of cabinet installation will be carried out. Cabinets can be customized by themselves, so that carpenters can measure the specific size, leaving a vegetable washing pool and a dish washing pool to combine them into one. You can also go to the store to buy ready-made cabinets and put them aside to see your preferences. After the cabinet is installed, the gas stove and range hood are installed.

9, socket installation

After all the procedures are completed, the last item is the installation of the socket switch. Before the circuit transformation, the socket has been reserved, and you only need to install it with your own tools. What needs to be emphasized is that the switch must be qualified in quality, and it is best to buy a brand, so as to ensure the safety of our future use.

The above is my introduction on how to better decorate the blank house and the skills of decorating the blank house. I hope it will be helpful for everyone to decorate. If you need to know more about decoration, please continue to pay attention to our website information.