Traditional Culture Encyclopedia - Hotel franchise - How to use washing machinery correctly?

How to use washing machinery correctly?

Washing equipment is the washing machine that we often use to wash clothes. Also use it frequently and maintain it regularly. Correct use and maintenance is very necessary for us to understand the washing equipment in the future. Below, we will make a simple communication on how to use and maintain the washing equipment correctly.

First, the washing machine:

1. Always wash the soap box with hot water to ensure the residue in the soap box.

Phenomenon: the soap solution did not enter the outer cylinder smoothly, and the corrosion of the outer cylinder intensified.

Cause: Soap residue is corrosive.

Solution: Wash the soap box with hot water to ensure that there is no residue in the soap box.

Correct operation: after washing every day, rinse the soap box with hot water.

2, manual tanker refueling should be standardized operation.

Phenomenon: The service life of the bearing is short.

Reason: Adding grease and using oil pump may be incorrect and irregular.

Solution: Use 0# lithium-based grease or 3# lithium-based grease mixed engine oil as grease, and the oil pump must press the handle to the bottom every time it refuels.

Correct operation: according to the product instruction manual, choose the grease correctly and use the oil pump in a standardized way.

3. When washing linen, be sure to remember: check whether there are sundries in linen!

Phenomenon: the inner cylinder is scratched and the linen is scratched.

Cause: There are metal foreign objects in the rotating cage of the washing machine.

Solution: Remove the metal foreign objects in the rotating cage.

Correct operation: before washing linen, be sure to clean up the sundries in clothes or fishbones and bones in tablecloths to avoid unnecessary quality accidents.

4, poor drainage, machine damage.

Phenomenon: the washing machine vibrates greatly when it is high, and the inner cylinder rubs the knocker when it is serious.

Cause: There is something wrong with the design and installation of the drainage pipeline of the washing machine, or the drainage of the pipeline is not smooth. It directly affects the uniform distribution and dehydration of clothes by the machine.

Solution: The washing machine pipe is thick, or the washing machine pipe is bent too much.

Correct operation: when installing the washing machine, the number of elbows installed should not exceed two; Soft drainage

Tube, should not be too long, to avoid discounts; Do not block the pressure balance pipe during installation.

5. Machine accidents caused by too little clothes.

Phenomenon: the washing machine is displaced, and the door ring is damaged. In severe cases, the bearing seat, bearing and sealing ring are damaged.

Reason: The loading capacity of the washing machine is lower than the low standard required for loading capacity, and the laundry site personnel are off duty.

Solution: Replace the bearing and sealing ring, repair the door ring of the washing machine, and train and educate the operators of the washing machine.

Correct operation: the washing machine should be loaded in strict accordance with the specified requirements, and the laundryman should not leave his post without permission when the washing machine is working.

Second, the dryer:

1. Unreasonable installation of exhaust pipeline causes slow drying speed of dryer.

Phenomenon: The drying speed of the dryer is slow.

Reason: When installing the dryer, the design of exhaust duct is unreasonable; There are many elbows between the air outlet of the dryer and the main exhaust pipe at the top of the laundry room, and each elbow is connected at right angles, so the exhaust resistance of the machine fan is large. Because the right angle is adopted at the joint with the exhaust manifold, the exhaust effect of this machine will be affected when other machines work.