Traditional Culture Encyclopedia - Hotel franchise - Disassembly and installation method of toilet door lock

Disassembly and installation method of toilet door lock

Disassembly and installation methods of toilet door lock are as follows:

Tools: screwdriver, new door lock.

1. Take a screwdriver and unscrew the old door lock. The position of the screw is generally on the inside of the bathroom.

2. Generally, there are two screws up and down. After unscrewing, the old door lock can be removed. After cleaning the stains on the original door lock, you can prepare to install the new door lock.

3. Take out the new door lock and install the door handle first. Screw in and fix the screw of the door handle from the back with a screwdriver.

There is an iron plate on the door lock, which is an anti-lock accessory, as shown in the figure below.

5. Take out two long screws, one end of which is fixed on the door lock outside the bathroom, and then install the door lock in the original hole position by hand. After the holes are aligned, the long screws can be screwed in and fixed.

6. Even after the installation is completed, try to see if the anti-lock can be used.