Counter-related

The production of display cabinets, also known as counter production, is the process of turning display cabinets into products. Raw materials will be made into display cabinets in shopping malls, specialty stores and other stores through the construction drawings and renderings of display cabinets. The production of display cabinets is also very particular. A successful display cabinet needs the following points: 1 Make full and reasonable use of special space. 2. Complete the practical function of displaying goods. Beautiful and novel appearance, eye-catching, giving a good impression. 4. comply with the CI requirements of the merchants. A perfect display case must be made of tempered glass. This not only ensures the display effect, but also ensures that broken glass will not hurt people. The following small series will give you a detailed explanation of the production points and processes of the display cabinet.

First, the basic process of making display cabinets

Yang Shen showcase takes wooden cabinets as an example.

1. Woodworking part: determine the cabinet structure (renderings, floor plans and construction drawings);

A: structure: determine the size of the cabinet split structure.

B: Material: Class 3A high-density fiberboard with 5 mm, 9 mm, 12 mm and 15 mm.

2, determine the structure, material, enter the cutting stage:

The driller separates different types of plates with a precision saw with a hand-pushing table, and then enters carpentry for nailing, which requires smooth and beautiful modeling lines, tight nailing and full glue.

3. Paint part:

A. material: 3C certified national standard paint: (PE white primer, yellowing-resistant and wear-resistant topcoat)

1). Grey batch grinding: firstly, smooth the dents such as nail holes and interface gaps on the cabinet with putty. If the sag is too large, it should be returned to the woodworking section for technical treatment; After the putty is dry, fill the cabinet with pig blood ash and do not miss it. Then use 240# sandpaper to smooth the putty and pig blood ash, then brush the sealed transparent primer, and then use 240# sandpaper to polish the paint to make the surface of the cabinet smooth and flat.

2). Primer: The whole cabinet is painted with PE white primer by hand, so that the cabinet is isolated from the outside world, moisture-proof, avoiding the phenomenon of "eating paint in the cabinet" and ensuring the later topcoat to be more shiny and full.

3) Oil grinding: after the paint is completely dried, grind it, grind the cabinet with 240# sandpaper, and then grind it with 400#/600# sandpaper.

Use sandpaper to clean the sand marks on the surface.

4) Topcoat: the exposed part of the counter is painted by hand, and the topcoat master has a good technical operation level. The paint room is guaranteed to be dust-free and isolated from the outside world, and the cabinets are free from sagging and particles, with uniform luster and good feel.

4. Packaging: Check the paint quality of cabinets, and install hardware fittings and lamps and wires.

A. packaging material: the bottom layer is wrapped with pearl cotton and bubble film, and the corner protector and paper cover are used externally. Special cabinets are packed in wooden frames and boxes.

Service flow/procedure

1. In terms of design drawings, drawings are generally designed according to the VI standards and requirements of customers. At the same time, we should consider the positioning and image of different shopping malls and make different designs. Yang Shen showcase manufacturers will also make a design flow document according to the special measurement sheet, reflecting the specific information one by one, so as to make the project operate and implement better. These documents will be tracked by the showcase in Yang Shen, starting from the receipt of the measurement form, to the confirmation of the project order, and then to the factory.

2. In the process of making the showcase, the mall also has certain specifications and requirements for the production, and customers also need the production of the showcase to meet the customer's CI standards and positioning. At this time, the confirmation of both parties must be strictly implemented, otherwise conflicts will easily occur. Under normal circumstances, the manufacturer of the showcase will fax the special measurement sheet to the customer, and the customer will further communicate with the shopping mall about the specific requirements and information on the measurement sheet to confirm that there is no conflict, so that there will be no mistakes in the whole process and the designed drawings will be recognized by the shopping mall and customers.

3. The showcase factory shall be constructed according to the drawings and completed within the specified time;

4. Logistics and transportation, providing after-sales service.

Second, the selection of materials for the production of display cabinets

Wood is an indispensable material for making display cabinets. Ordinary display cabinets include joinery boards, multilayer boards, integrated boards, high-density boards, decorative boards and other boards. The performance and function of these Woods in the manufacture of display cabinets will be described as follows:

Blockboard: It has good moisture-proof effect and cannot be painted directly.

The center of the joinery board is the core material made of natural wood strips, and both sides are glued with veneer, which is one of the most important materials for making display cabinets. It can be used as the center of vertical structure, wooden door and external structure in display cabinets, with good waterproof performance and strong structural support. The choice depends on the internal wood, which should not be too broken, and the joinery board with a gap of about 3mm is appropriate. Because the wood grain exposed on the surface is not beautiful, it is rarely painted directly, and veneer plywood is generally attached. Wooden structures such as display cabinets, decorations made of them, must be glued with density boards, painted or pasted with fire boards can also achieve good display effects.

Integrated board: not easy to deform

This is a new type of solid wood material, using high-quality imported large-diameter logs, staggered as indicated. Due to different processes, this board has excellent environmental protection performance, which is 1/8 of the allowable formaldehyde content of blockboard. On the other hand, this kind of board made of American spruce and other solid wood can be painted directly, which saves a process compared with joinery board.

Medium density board: good flatness.

The medium density board is made of wood flour and sawdust, which has good flatness but poor moisture resistance. In contrast, the holding power of MDF is poor, and the screws are easy to loosen after tightening. Because the strength of MDF is not high, it is difficult to fix it again, so it is rarely used to make cabinets, and it is mostly used to paste the surface of paint display cabinets.

Three-sided plywood: rich wood lines

Also known as three-layer laminate, three-layer laminate, different layers have different names. Its advantages and disadvantages mainly depend on raw materials and wood varieties, such as maple plywood, with clear and generous lines; Oak plywood, straight and organized. This material is used to make open paint-treated display cabinets, and the effect is more upscale. Usually, the wood grain effect is mainly used in the production of display cabinets, that is, a very thin solid wood veneer is attached to the three-layer plywood in the factory. Veneered plywood is easy to use and moderate in price.

According to the rules, the formaldehyde emission of decorative wood in shopping malls must be less than or equal to 1.5 mg per liter, assuming that more than 5 mg per liter is unqualified. Secondly, it depends on the moisture content of wood. When the moisture content of wood is higher than the equilibrium moisture content of the environment, wood will shrink monotonously, and vice versa. The main reason of wood cracking and deformation is that the moisture content is too high or too low. Finally, when buying, don't just aim at low prices. Materials sold at low prices are usually shoddy, and formaldehyde seriously exceeds the standard. It should be bought in the right market, and it is best to buy brand materials.

Third, the design principles of showcase

Reduce the specifications and quantity of standardized assembly parts to the minimum, so as to be assemblable, diverse, convenient, interchangeable, multifunctional, easy to store, easy to transport, beautiful and durable.

1. Pipe rack assembly structure (1. Spherical joint Multi-directional bolt fastening joint is a spherical structure with 18 screw holes, and the frame is a circular tube with rotatable bolts at both ends, which can be transformed and combined in various ways.

(2) The plug-in combination connector adopts 2-6 joints, which can be used for multi-party plug-in combination. The frame structure adopts circular tube or square tube.

(3) The slotted circlip frame is slotted special-shaped alloy or composite plastic pipe. The vertical frame has multiple grooves to meet various requirements. The upper and lower horizontal frames are slotted on both sides for clamping the exhibition boards.

(4) The sleeve and the socket are connected in parallel, welded into a frame member by round steel, and assembled by small connectors.

(5) Two-way folding adopts circular tube frame structure and is fixed with bolts with folding joints.

2. Exhibition board connection structure

(1. The included angle between two tiles can be adjusted at will within the range of 90-180.

(2) The multidirectional clamp suitable for multidirectional connection is fastened by bolts.

(3) The eight-way card board adopts the eight-way card board connector made of metal and plastic, which can make the exhibition board connect in all directions or extend upwards.

(4) The two clips of the hinge clip type are fastened with bolts, and the angle of the assembled exhibition board can be adjusted at will.

3. The folding display case and the base part of the assembly structure of the display case adopt a folding frame plate, which can cover the desktop after being unfolded; The glass of the showcase can be inserted into the groove of the desktop, and the four corners are connected by corner wrapping or corner support.

Display cabinet manufacturer

Changzhou zhongmei presentation equipment co., ltd

Changzhou Zhongmei Exhibition Equipment Co., Ltd. is a professional exhibition, specialty store, chain store, corporate image exhibition hall, supermarket showcase and other design and production construction units. It mainly serves the decoration of exhibition halls, the interior decoration of specialty stores, individual shops, company exhibition halls, shopping malls, supermarkets, clubs and hotels, and the design and production of display cabinets.

Dongguan hezheng showcase co., ltd.

Dongguan Hezheng Display Cabinet Co., Ltd. was established on 200 1, located in Dongguan City, Guangdong Province. Is a professional manufacturer of various display cabinets. The main products are: all kinds of specialty stores, all kinds of display cabinets, all kinds of display racks and so on.

Shenzhen exquisite presentation products co., ltd

Shenzhen Exquisite Display Products Co., Ltd. is a design and engineering company focusing on retail terminal display racks/display cabinets in overseas markets. Since 2005, the company has been engaged in the foreign trade advertising equipment industry, focusing on the customized design and production of display racks/display cabinets.

Although the display cabinet is only a counter for displaying goods, it is also a commodity itself. Display cabinets are used in shopping malls, supermarkets and shops to display and store goods. It has a strong appearance and personality, and also has an advertising effect, so as to achieve a better profit purpose and provide a better platform for the brand. A good display cabinet has the above characteristics, which can make the displayed goods more beautiful and attractive. Therefore, display cabinets affect the image of a brand, and the production of display cabinets determines the quality of a display cabinet.