What should I do if the interface below the sink leaks

The leakage of the interface below the sink needs to be found out first, and then some raw material belts are wound, water pipes are replaced, water valves are changed, and glass glue is coated.

First, find out the specific reason and location of water leakage at the outlet under the sink, and then take corresponding treatment measures according to the actual situation. Different reasons and locations will lead to different treatment methods.

1. If the sewer pipe leaks and it is caused by cracking and aging of the sewer pipe, it is necessary to wrap some raw material belts around the leaking position of the sewer pipe or directly replace it with a new sewer pipe.

2. If there is water leakage at the water valve of the sink, it is necessary to check whether the raw material belt of the silk mouth is wound well. If the raw material tape is damaged or loose, it needs to be rewound. If there is nothing wrong with the raw material belt of the silk mouth, it is caused by the damage of the water valve. At this point, the water valve should be replaced with a new one.

3. If the sealant at the joint of sewer pipe falls off due to aging, clean up the leaking place, and then re-attach the sealant with glass glue.

Matters needing attention in the use of sink.

1. In daily life, try not to put bulky or bulky items on the sink, but put them in the surrounding lockers, so that the countertop will be more tidy and messy, and the sink will not be crushed.

2. At ordinary times, be sure to clean the sink regularly. In the process of cleaning, you should use a sponge or a soft rag and use a neutral cleaner to clean it. Do not use a rough rag or hard brush to clean, so as not to scratch the surface.