How big is the marble on the hotel wall?

Is it the ground or the wall? If the ground is beige, it is 800*800. If the exterior wall is the cafe imperial interior wall, some cave stones can be used to make the guest room or lobby, and the wettest paste of the guest room can be 305×305 made of Spanish beige plate with a thickness of one centimeter. The price is cheap and upscale. See the design style on the lobby wall. White marble is difficult to produce on a large scale now, and the price is quite expensive. You can choose some beige imported materials, such as Italian wood grain and Roman cave stone, with specifications around 600, so that you can control the output and price.

It is best to choose Anji beige or California color. The cheap and high-grade gold wire wall is yellow (the price is moderate and the effect is good), and the hypotenuse size is 50* 100cm.

If it is a large area tooling, it is best to use structural dry hanging. If it is wet, marble is heavy, easy to fall off and unsafe. Others are relatively troublesome and unsafe.

Jia Zhuang recommends dry hanging and point hanging. You can wet paste a small area, but I always feel that it will fall off at any time.

If it is a large area tooling, it is best to use structural dry hanging. If it is wet, marble is heavy, easy to fall off and unsafe. Others are relatively troublesome and unsafe.

Jia Zhuang recommends dry hanging and point hanging. You can wet paste a small area, but I always feel that it will fall off at any time.

1. Dry hanging of steel structure; Second, the cement mortar wet paste; Third, hang; Four, copper wire and grouting.

Wet sticking and dry hanging construction, but wet sticking marble on the wall is more likely to produce stone lesions.

Dry hanging: dry hanging is connected with steel skeleton.

Wet hanging: the back of marble is waterproof, and the opening is connected with copper wire by steel skeleton or bolt, and concrete is injected. Other construction techniques are usually bonding to a relatively flat pad.

Supplementary matters:

"Dry hanging" generally refers to the construction method of connecting steel skeleton and stone with stainless steel pendants.

"Dry bonding" generally refers to the construction method of using dry powder adhesive as bonding material for marble stone base and cement mortar as base before paving.

"Wet hanging" generally refers to the construction method that cement mortar is used as the bonding material of marble stone base, and the board is hung first and then the mortar is poured.

"Wet pasting" generally refers to the construction method that the marble stone base uses cement mortar as the pasting material, and the base uses cement mortar to make the base before paving the board.

Introduction of dry and wet suspension:

Dry hanging is to cut one side of the plate, make expansion screws on the wall, hang the perforated angle iron as a beam, then put the pendant in the slit opened in the stone, screw the pendant into the eye of the angle iron with screws, and stick the pendant with marble glue. Another method is to insert a long plug-in into the wall instead of using angle iron as a beam, and fix the rest with glue. Wet hanging is to fix the position of the plate (usually a nail is hit on the wall and the other end of the copper wire is fixed on the stone). A plate is usually two nails), and then cement is poured into the joint between the plate and the wall.

Generally, it is used for both wet and dry purposes. Dry hanging is generally a large-area external wall, and wet hanging is basically gone now. Only the tiles (bathroom, kitchen) are wet. There is basically no wet hanging in the project, and now it is basically installed and repaired at home.

Wet pasting refers to pasting 3-4cm cement mortar on the back of stone, while dry hanging refers to fixing marble stone with steel keel pendant. The difference between the two is that the way to fix the back is different, but the cost is also different. Dry hanging is much more expensive than wet sticking.