How to clear the toilet when it is blocked?

The toilet is blocked with shit, the trick to clear it.

The toilet is blocked with shit, which is a way to clear it. Toilets are often seen in our daily life, because toilets are an indispensable part of our home environment, but toilets are easily blocked. Here are some tips for cleaning toilets clogged with excrement.

The toilet is blocked with shit. Unique skill 1

First, the toilet is blocked by shit.

1. As for the trick that the toilet is blocked by shit, this situation is generally easier to solve. These blockages can generally be decomposed with hot water. First boil a pot of hot water and pour it into the toilet, then soften the blockage in the water pipe. Let them soak for a while, and when they are soft, you will see the blockage slowly discharged, and then rinse them with large buckets of water several times. It can also be dredged with iron wire or special dredging tools, and it can also be solved.

2. If it is blocked by toothpicks, bones and other objects that are not easy to soak and decompose, this situation will be more troublesome. You can use the principle of pressure to find a longer plastic water pipe with one end connected to the tap water pipe and the other end stuffed into the toilet. Then, seal up the unwanted rags or clothes and try to use a whole piece to prevent the blockage from getting worse after the cloth is scattered. Then turn on the tap water, use the pressure of water to knock out the hard objects and pick them up.

Second, the toilet is blocked with salt and baking soda.

1. For the method of blocking the toilet with salt and baking soda, first prepare a cup of baking soda, an appropriate amount of hydrochloric acid and an appropriate amount of hot water. Pour the prepared baking soda into the blocked toilet. Try to land on the lower part of the middle, not on the toilet wall. It will prevent insufficient quantity, difficult reaction and no effect.

2. After pouring baking soda, pour the prepared hydrochloric acid into it, and pay attention when pouring. The role of hydrochloric acid is to react with baking soda to produce a large amount of carbon dioxide gas, which increases the pressure of the toilet. Another function is that hydrochloric acid is an acidic substance, which can react with some sticky paste on the toilet wall, so that the blockage loses part of its adhesion and is easier to be washed away.

3. After pouring in baking soda and hydrochloric acid, quickly pour in hot water. Boiling water can accelerate the reaction between baking soda and hydrochloric acid, and can also soften some organic substances, such as fatty acids and oils. And the adhesiveness is lost.

4. After the hot water is poured in, quickly cover the toilet lid to ensure that the sealing effect of the toilet is very good. If the sealing ring is dropped or not, it can be replaced with a wet towel. Cover the toilet seat to ensure tightness. You want to use the pressure of gas to open the toilet seat.

5. After sealing for five to ten minutes, press the flush button to flush. On the one hand, it increases the pressure in the toilet, which is beneficial to dredge the toilet. On the other hand, flushing the toilet washes away the smell of baking soda and hydrochloric acid.

Third, never flush the toilet with hot water.

1. Some people think that when dealing with the problem of toilet blockage, never flush the toilet with hot water. So what is the reason? In fact, in the process of flushing the toilet with hot water, the transpiration of water vapor will not only corrode the wall, but also make the smell outside the concrete around the toilet more intense. In addition, too much water will also lead to the smell of fog, which is not good anyway.

In addition, in case the waterproof construction of the bathroom is not done well, the probability of water seepage is very high. This waterproofing refers to the secondary waterproofing during decoration. Steam generated by hot water can cause cracks in walls and even concrete.

The toilet is blocked with shit. Trick 2

The toilet is blocked with shit.

1. Soak for a while, and then pressurize the toilet water with a large basin of hot water. Increase the pressure and flush it down. It doesn't matter.

2. The easiest way is to mash the feces with a wooden stick after defecation. If not, prepare a basin of defecation water, add a basin of water, and increase the water pressure guarantee.

3. Use the toilet plug. If the water doesn't flush, use the toilet plug. Put the toilet in the toilet and press it a few times. Remember, you must suck it before pressing it, let the vacuum pressure suck up the blocked things, then press it again, and finally flush it with water until the water can flow smoothly, which proves that the toilet is unobstructed.

4. Pour a little toilet dredge and a few drops into the toilet. Pour a pot or half a bucket of waist-high hot tap water into the toilet. The reason why water is poured from the waist height is because the water at this height can help clear the blockage or corrode it.

Toilet maintenance knowledge

1. Make sure that the water shutoff valve of the toilet is in the closed position.

2. After removing the plunger of the float valve, you will see one or two washers (or O-rings). If any of these components fails, water will continuously flow out through the valve plunger, and the water tank of the toilet will always be open. Therefore, if damaged, all gaskets should be inspected and replaced immediately.

3. If the float valve is sealed, replace it completely. Turn off the water source of the toilet at the water stop valve, and then drain the water in the water tank. Unscrew the floating arm from the old ball valve, and then remove the water injection pipe from the overflow pipe.

4. Look for the connecting nut or sliding nut under the water tank, where the water inlet pipe enters the bottom of the water tank. Loosen the connecting nut, remove the water inlet pipe, and then clamp the lock nut or lock nut under the water tank with adjustable wrench. They are located above the sliding nut, and the base of the float valve is fixed with another wrench in the water tank.

5. Unscrew the lock nut under the water tank and remove the float valve. If the nut is too tight, loosen it with permeable lubricating oil.

6. Take out the old device in the water tank, and remove and keep the gaskets at all joints inside and outside the water tank. There may be new gaskets in the new valve, but the old parts should be kept until the installation of the new device to avoid the damage of the new parts during the installation.

7. Insert the new ball valve into the hole of the water tank. After the gasket is put into the water tank, tighten the lock nut outside the water tank, so that the inner gasket is tightly pressed on the hole of the water tank, which plays a sealing role, but do not tighten it too tightly.

8. Replace the connecting nut and water inlet pipe, reinstall the floating arm, and then insert the water injection pipe into the overflow pipe.

9. Let the water flow out again on the closed valve of the toilet, and check whether there is water seepage in all parts. Of course, check whether the floating ball scratches the back wall of the water tank. If there are these phenomena, make appropriate adjustments.

The toilet is blocked with shit. Trick 3

First, what should I do if the toilet is blocked? The simplest trick

I have used it several times, and a kind of "pipeline connection" sold in the supermarket is quite effective, probably 10 yuan. Once every half month, it won't be blocked.

Second, what should I do if the toilet is blocked? How to solve frequent jams?

Try a longer one, not hard but not very soft. Insert a hose and flush with water at the same time. Don't push the water too hard, so as not to spill it, then flush it. I tried it, and it worked well.

Third, what should I do if the toilet is blocked? Netizen spoof tricks

If it is blocked by easily decomposed objects such as paper scraps, you can pour boiling water to soften the blockage in the sewer pipe first, but don't worry too much. Soak for a while. After the blockage softens and disperses, watch the sewage drain away slowly, and then rinse it with big bucket of water.

You go to the fish market to buy some loach fish, live, and pour them into the toilet. Just a moment, please. This is an exclusive secret recipe. I won't talk about ordinary people!

4. What should I do if the toilet is blocked? How should it be removed?

1. Wipe the toilet with a rag.

You can find a hose, one end of which is connected with tap water, and the other end is wrapped with a rag and inserted into the sewer pipe. Just turn on the tap water. Principle: The tap water pressure is about 4Mpa, which can completely flush your sewer. Remember not to let air leak at both ends of the hose to maintain the highest pressure.

2. dredge with a drink bottle.

I bought a bottle of Coca-Cola, drank it, cut off the bottom of the bottle, put it in the toilet, held the bottom of the bottle with my hand, and took a few sips up.

3, the toilet spirit dredge

Buy a bottle of toilet cleaner in the supermarket. This is corrosive, so be careful. Introduce hot water into the squatting pan first, and then introduce liquid. The amount introduced needs to be read in the instruction. After the last half hour, use the toilet sputum suction tool of method 1

4, professional experts dredge.

If all the dredging methods described in the article have been tried, but the cause of the toilet blockage can't be found, you can call a professional master to dredge it at this time, so as to avoid more trouble if you don't know how to make the toilet more blocked.