What matters need to be aware of in hotel water and electricity renovation?

Hydropower transformation is the prophase project of decoration, and its engineering quality affects the quality of daily life. Therefore, hydropower transformation must be done well, so what items are needed for hydropower transformation? Let's take a look at the matters needing attention in 10 hydropower transformation, and the decoration owner must not miss it.

1 First of all, it is necessary to determine whether to take a bath standing or lying down, use a bathtub or shower, what the size is, and whether the bathroom can accommodate this size. These problems will affect the water supply and drainage design of waterway and the socket position of circuit.

2. If you choose to install a shower room, do you want to install a shower room or a shower curtain? Do you want to install a base? Is there a floor drain? Where is the water outlet?

3. The conventional design of the shower outlet is left hot and right cold, and the distance between two pipes should be kept at 15cm. Because there are many vertical shower faucets on the market at present, this kind of shower faucets have strict requirements on the spacing and size of water outlets. First of all, we must ensure that the horizontal heights of the two water outlets are consistent, and also ensure that the two water outlets are on the same horizontal plane. It should also be noted that the water outlet should not be located at the waist line, and the height should be determined according to the average height of family members.

4. The kitchen and bathroom renovation of second-hand houses may also involve the movement and increase of floor drains. Pay attention to raising the ground when moving the floor drain. If the deep-water sealed floor drain is to be installed, the ground should be raised at least 10cm, and local ground elevation or overall ground elevation can be adopted. When replacing the floor drain, it should be noted that the ordinary floor drain cannot be used as the floor drain of the washing machine, and there will be backwater.

5. The displacement of the toilet is also a problem that will be encountered when the toilet is disassembled and replaced, but remember that the moving distance of the toilet should not exceed 10cm, otherwise the toilet will not run smoothly and will be blocked easily. If you must move the toilet, then you must change the pipe from downstairs to move the toilet.

6. Whether the Yuba is warm with air or light involves circuit conversion, because the Yuba with light is usually connected by 5 wires, while the Yuba with air is usually 3-8 wires, depending on which model you choose.

7. No matter whether the range hood is European, Chinese or side suction, the requirements for sockets are different.

8. If you want to install a smart toilet, don't forget to leave power for the toilet.

9. Do you want to install a kitchen treasure in the kitchen? If you install kitchen treasures, remember to reserve power outlets.

10, consider whether to use an instant electric water heater or an electric oven at home. The power of these two kinds of electrical appliances is generally relatively large, so they need separate leads, otherwise they cannot be used normally. Some old houses are 20 meters long, so high-power appliances cannot be used in such houses.