How to get from Zhongshan North Station to Regal Riverside Hotel in Dayong

Driving route: about 145.3 kilometers in total

Starting point: Zhongshan North Railway Station

1. Driving plan in Zhongshan City

1) From Start due west from the starting point, drive 130 meters, and turn left

2) Drive 140 meters, turn left into Minying West Road

3) Drive along Minying West Road 480 meters, turn right and enter Xingwang Road

4) Drive along Xingwang Road for 250 meters, turn left and enter Minke West Road

5) Drive along Minke West Road for 270 meters. Turn left into Dongming North Road

6) Drive along Dongming North Road for 900 meters, cross the Dongming North Road Bridge for about 260 meters, and go straight into Gangguang Avenue

7) Drive along Gangguang Avenue for 2.4 km, go straight on the ramp

8) Drive along the ramp for 290 meters, cross the port viaduct for about 450 meters, then go straight onto the Shenluo Expressway

9) Drive along the Shenluo Expressway for 2.4 km, heading towards Guangzhou/G4W/Shenzhen/Shaoguan, turn slightly left and enter Xinlong Overpass

2. Drive along Xinlong Overpass for 260 meters, and after passing Xinlong Overpass for about 870 meters, go straight into Guang'ao Expressway

3. Drive 23.4 kilometers along the Guang'ao Expressway, cross the Tanwei Bridge, toward Dongguan/Shenzhen/G9411/Nansha, turn slightly right and take the ramp

4. Drive along the ramp for 1.1 kilometers and go straight into the Wanfo Expressway

5. Drive along the Wanfo Expressway for 14.5 kilometers, cross the Dashijia Viaduct, toward Weiyuan, turn slightly right and enter Weiyuan Interchange

p>

6. Drive along Weiyuan Interchange for 970 meters. After passing Weiyuan Interchange for about 730 meters, go straight to Guangshen Yanjiang Expressway

7. Drive along Guangshen Yanjiang Expressway for 44.8 kilometers. Go straight into the Guangshen Riverside Expressway

8. Drive 60 meters along the Guangshen Riverside Expressway and go straight

9. Driving plan within the Hong Kong Special Administrative Region

1 ) Drive 880 meters and go straight into Dongbin Tunnel

2) Drive along Dongbin Tunnel for 4.6 kilometers and go straight onto the ramp

3) Go along the ramp for 120 meters and turn right into Dong 2 Road

4) Drive 360 ??meters along Donger Road, turn right

5) Drive 1.3 kilometers, go straight to Route 10

6) Drive along Route 10 Drive 40 meters on the main line and go straight to Route 10

7) Drive 2.1 kilometers along Route 10 and go straight to the Shenzhen Bay Highway Bridge

8) Drive 7.9 kilometers along the Shenzhen Bay Highway Bridge , heading towards Tuen Mun/Kowloon/9, turn slightly left onto the ramp

9) Drive along the ramp for 1.2 kilometers and go straight into Yuen Long Highway

10) Drive along Yuen Long Highway 780 meters, go straight and enter Tuen Mun Road

11) Drive along Tuen Mun Road for 18.5 kilometers, towards Tsuen Wan (North)/Sha Tin/9, turn slightly left and enter Elephant Trunk Hill Road

12) Drive along Elephant Trunk Hill Road for 4.5 kilometers and go straight into the Chengmen Tunnel

13) Drive along the Chengmen Tunnel for 2.7 kilometers and go straight into the Chengmen Tunnel Highway

14) Along the City Drive 1.9 kilometers on the Men Tunnel Highway and go straight into the Tai Po Highway-Sha Tin section

15) Drive 1.5 kilometers along the Tai Po Highway-Sha Tin section, pass the Wo Shun House on the right, and exit at Fo Tan/Peng Fook Park. Turn slightly left onto the ramp

16) Drive along the ramp for 300 meters and turn right to enter Fo Tan Road

17) Drive along Fo Tan Road for 1.3 kilometers to the end

End point: Regal Riverside Hotel

I hope it will be helpful to you and hope you will adopt it!