How to open a safe? What should I do if the safe cannot be opened?

With the rapid development of the economy, safes are becoming more and more widely used, such as home safes, office safes, hotel safes, etc. But many people still don’t know how to open a safe, so I will introduce it to you next.

How to open a mechanical safe?

1. How to open a mechanical password safe (assuming the password is 80, 25, 50)

1. Turn the password disk in the right direction Turn clockwise so that the scale value "80" on the disk is aligned with the reference point on the disk, and then continue to turn clockwise three times to align the set of numbers just now with the reference point.

2. After the first step is completed, turn the code disk counterclockwise for one turn, and then continue to turn the code disk counterclockwise to align the second set of code "25" with the reference point.

3. After completing the above two steps, turn the password disk clockwise so that the third password "50" is aligned with the reference point.

4. After completing the above three steps, the password lock is now open.

5. Insert the key into the keyhole and turn it 90° clockwise. At this time, the big lock is also open.

6. Handle opening: Turn the handle clockwise or counterclockwise to the extreme position to open the door. (The key is to reverse the second password by more than 1 turn and within 2 turns. It must be correct every time and cannot be repeated more or less).

Note: Seeing the numbers counts once. If the last number of the dial is turned too far each time, you have to start over from the beginning and cannot turn back.

2. Simple memory method

1. Turn right three times or more and stop at the first password.

2. Turn left twice, that is, based on the first password, cross the second number to the left twice and stop

3. Turn right once , aim at the third password, and stop when you see the third password.

Remember: cis-anti-cis, 3, 2, 1. Then insert the key and turn it to open it.

What should I do if the safe cannot be opened?

1. What should I do if the electronic safe cannot be opened?

Use the master key and emergency key to open the door. There are Press the reset button:

1. Enter the new password and press the # key;

2. Restore the factory password. #Factory Password#*New Password# Enter them in sequence.

If the safe still cannot be opened after trying this method, you can also use the following emergency opening methods:

When the electronic password system fails and cannot be used normally, use the emergency opening method. The top of the power box plug (or similar thin rod) is located in the small hole directly below the panel. Open the emergency lock cover in the panel, insert the emergency lock key, turn the emergency key counterclockwise to open the electronic lock, and then use the door lock to open it normally.

2. What should I do if the mechanical safe cannot be opened?

Unlike the electronic safe, the password of the mechanical safe can be reset. You can only call the safe factory to check the original records.

What should I do if the mechanical safe forgets the password?

1. First of all, you can use the emergency key: because every safe will be equipped with an emergency key when it is sold, it is used in case of forgetting the password. In this case, you can use the master key to open the safe.

2. Contact the safe seller or the technical department of the manufacturer directly for help. Some safes allow you to reset the password using the original password.

3. If it doesn’t work, go to a regular locksmith company (must be registered with the police) for help.

4. If none of the above methods can open the safe, you can only destroy the safe and unlock it.

Summary: This is the relevant information about how to open a safe. I hope it will be helpful to you.