What is used to disinfect the toilet seat?

Toilets can be disinfected on the wall with disinfectant and soapy water, and toilets can be disinfected with special disinfection water from supermarkets.

Do you know how to disinfect the toilet and how to install it? Let me show you today.

(1) Before the toilet is installed, conduct a comprehensive inspection of the sewage pipeline to see if there are dirt, sand, waste paper and other sundries in the pipeline. At the same time, check whether the floor of the toilet seat is level. If the ground is uneven, level the ground when installing the toilet.

(2) Determine the center of the sewage pipeline and draw a cross centerline.

(3) Turn the toilet, determine the center on the toilet outlet, and draw a cross center line, which should extend to the feet around the bottom of the toilet.

(4) If the toilet foot has a screw installation position, it is recommended not to use it. One is to destroy the waterproof layer, and the other is to be afraid that the toilet will crack if it is tightened.

⑤ Install a special sealing ring at the toilet drain.

⑥ Align the reticle on the toilet with the reticle of the ground sewage outlet, install the toilet, press the sealing ring hard, and then stick a circle of glass glue around the bottom of the toilet. Toilet installation should be kept in front, back, left and right levels.

⑦ Install or debug water tank fittings. Check the tap water pipeline first, drain water for 3-5 minutes to flush the pipeline to ensure the cleanliness of the tap water pipeline; Install the angle valve and connecting hose, then connect the hose with the installed inlet valve of the water tank fittings and press the water supply button, check whether the inlet valve and seal are normal, check whether the installation position of the drain valve is flexible, check whether there is blockage and leakage, and check whether there is leakage into the water valve filtering device.

⑧ After the toilet is installed, wait for the glass glue to solidify before using it. The curing time is generally 24 hours.

Besides, the safety of the bathroom is also very important, because it is related to the safety of your family. Then let's walk into the world of toilet safety knowledge together.

Due to the serious water vapor in the use of the bathroom, materials with waterproof, anticorrosive and antirust functions should be selected when purchasing and decorating the bathroom ceiling.

Before laying the floor tile, be sure to be waterproof to ensure that the surface of the tile has a drainage slope and faces the floor drain. After laying the tiles, do a closed water experiment for at least 24 hours. At the same time, attention should be paid to the paving joints with wall tiles to ensure the overall comfort of the whole bathroom. Tiles should also be moisture-proof and waterproof, and should be flat when sticking tiles, and should be stitched and aligned with floor tiles to ensure the overall feeling of walls and floors. If you meet the outlet of the water pipe, the cut of the tile should be cut properly to make the overall appearance more perfect.