What is the glass roof made of?

All-glass curtain wall consists of glass ribs and glass panels. The glass thickness of all-glass curtain wall panel should not be less than 10mm, and the thickness of laminated glass plate should not be less than 8mm；; ; The cross-sectional thickness of the glass curtain wall rib is not less than 12mm, and the cross-sectional height is not less than 100mm ... When the glass curtain wall exceeds 4m (glass thickness10,12mm), 5m (glass thickness 15mm), 6m (glass thickness/kloc). The main components of the suspended all-glass curtain wall should have sufficient rigidity. When the steel truss or steel beam is used as a stress member, its center line is consistent with the center line of the curtain wall, and the center line of the elliptical screw hole should be consistent with the position of the anchor bolt of the curtain wall hanger. A rigid horizontal force transfer structure should be set between the hanging clip and the main structure of the hanging all-glass curtain wall. After all steel structures are welded, concealed works shall be accepted. After acceptance, antirust paint shall be applied. The glass panel of all-glass curtain wall is generally large in size, and mechanical suction cups should be installed. All glass curtain walls are allowed to inject silicone structural sealant on site. The whole glass panel shall not be in direct contact with other rigid materials. The gap between the board surface and the decorative surface or structural surface should not be less than 8mm, and it should be sealed with sealant.