How to use the soap dispenser?

Soap dispenser can be divided into manual soap dispenser and automatic soap dispenser, both of which are very simple to use. The manual soap dispenser will have a button, and the liquid can be discharged by gently pressing the button. The automatic soap dispenser is very sensitive to the discharge of liquid. When in use, first turn on the switch, then put your hand at the position of the liquid outlet, and the soap dispenser will automatically quantitatively discharge the liquid. When using the soap dispenser, it should be noted that the soap inside should not be too thick and should be replaced regularly. When filling liquid, avoid leakage and clean the soap dispenser regularly. Let's learn how to use the soap dispenser. First of all, how to use the soap dispenser

Many families will install a soap dispenser for daily cleaning, which can automatically and quantitatively distribute hand sanitizer. It seems simple to use, but some friends don't know much about the use of soap dispenser:

1, how to use the manual soap dispenser

Manual soap dispenser is generally wall-mounted, and its use mode is very simple. There is a telescopic button at the lower end of the machine, which is also the switch of the manual soap dispenser. The liquid can be discharged by gently pressing the button. There are also some sink-type manual soap dispensers. When you use it for the first time, add clean water to drain the vacuum inside, and then add soap. When you use it in the future, you can discharge it by pressing it.

2, the use of automatic soap dispenser

Automatic soap dispenser, also known as soap dispenser and induction soap dispenser, automatically discharges liquid through induction. When in use, turn on the switch of the soap dispenser to reach the liquid outlet of the soap dispenser. The soap dispenser will sense and automatically receive the drainage signal, and the automatic soap dispenser will stop the drainage after reaching the set drainage time.

Second, what should I pay attention to when using the soap dispenser?

The use of soap dispenser seems simple, but there are some precautions. Points for attention in using soap dispenser are as follows:

1, the soap in the soap dispenser should not be too thick, otherwise it may not produce liquid, so pay attention to the viscosity of the soap in the soap dispenser. If it is too thick, you can add a little water and stir it a few times.

2. The soap in the soap dispenser should be replaced regularly to avoid deterioration. The dust and impurities of deteriorated soap may block the outlet and affect the normal use.

3. Attention should be paid when filling the liquid with the soap dispenser at ordinary times to ensure that the soap dispenser does not leak liquid and then put it back. In case of leakage, the interface shall be tightly connected; If it still leaks, it may have been damaged and needs to be repaired or replaced.

4. Pay attention to the use of automatic soap dispenser, and don't scratch the sensor head when cleaning; Avoid using various chemical diluents to avoid discoloration of the fuselage.

5. When using the soap dispenser for the first time, there may be some clear water in the inner bottle or pump head, which is normal and may be left when the product is tested before leaving the factory. Don't worry, just clean it before using it.