What if the shower nozzle cracks and leaks?

First, how to deal with the leakage of the shower?

1, the shower nozzle leaks, which is basically the problem of water leakage at the interface. It may be that the joint between the shower head and the handle is not well connected and the sealing work is not done well. You can unscrew the handle from the hose with a plate clamp first, then tie the hose with adhesive tape and clean the thread on the handle. The trouble of water leakage can be avoided by coating the periphery with glue and tape, and finally screwing the nozzle back to remove the excess glue or tape.

2. If the interface is broken, the shower head needs to be replaced again. Go to the hardware store to choose the same model, buy it back and reinstall it, and just turn it back to its original position. Usually, we should also pay attention to handling with care. If you fall heavily, cracks will appear at the interface and water will leak over time. Pay attention to protective measures at ordinary times.

3, because showers are basically plastic or cast iron, if they are plastic, they are even less resistant to falling. So it must be noted that if the shower head is made of pure copper, the quality will be relatively better.

Second, what's wrong with the small amount of shower water?

1. When taking a bath, if the water flow is small, it is not particularly comfortable to take a bath. To find the problem, it may be that the current water pressure is relatively low, resulting in a relatively small water output. Especially for high-rise residents, once the water pressure is low, this problem often occurs. The solution is to install a booster pump in front of the water supply valve and the water purification port.

2. It is also possible that the shower is blocked by scale. You can take apart the shower first and soak it in a solution containing baking soda and white vinegar. After soaking for a period of time, clean up the dirt and put it back, and you will find that the water output has increased.