What do you need to carpet the hotel room? Just flatten the floor below and put a carpet on it? Or do something?

1. Compared with other floor materials, carpet has more obvious noise reduction and sound absorption effects. It is the most effective acoustic building material, which can absorb indoor echo noise and establish the reflection and propagation of ultrasonic waves through the ground wall.

2. It can decorate the environment. Carpet is a practical and decorative handicraft. Because the carpet is rich in colors, it can also be customized according to your own preferences. Become a fashion element for the host to show his own style.

3, heat preservation and heat conduction; Compared with hard floor materials, carpet has certain warmth retention, and has better heat conduction effect on floor heating, which increases warmth and comfort.

Method:? Carpet laying has two ways: adhesive laying and floating laying. Sticking is to stick the periphery of the carpet to the ground with double-sided tape; Floating shop is to lay the carpet flat on the ground without sticking to it. When using carpets, we should carefully measure the specific size and shape of the floor in the room. The clear length and width of the room floor should be measured along the bottom edge of the skirting board. If two clear length values or two clear width values are different, the larger value should be taken. If there is a door or an empty ring in the room, it should be measured to the bottom of the door leaf or the outer edge of the empty ring. Because the carpet at the door or the empty circle is connected with the carpet in the room, it is not allowed to spread it separately, so the net length or width of the floor in the room should be counted at the door or the empty circle.

When purchasing carpets, the required carpet length is equal to the net length of the room plus the cutting loss rate, which is about 0.5% ~ 1% of the carpet length. The width of the carpet is preferably equal to the clear width of the room, so that the whole picture can be laid completely, saving materials, or the width of the carpet can be slightly larger than the clear width of the room, so that it can be laid after a little cutting without too much waste. If the room is wide, try to make a half carpet, or several whole carpets, and leave the non-whole carpet on the inconspicuous wall.

Before laying the carpet, the ground should be cleaned and not wet. Lay the carpet flat on the ground and cut it according to the net length of the room and the shape and size of the door and empty ring. The cutting edge should be straight and neat.

To stick a carpet, first draw an adhesive tape and stick a range line on the floor, and then spread double-sided tape on the floor according to this range line. Then stick one end of the wide edge of the carpet on the double-sided tape, slowly unfold the carpet, and stick the long edge of the carpet on the double-sided tape while unfolding until the other wide edge of the carpet is finally stuck on the double-sided tape.

? To make the carpet float, first aim at one end of the wide edge of the carpet and lay it flat on the ground, and then hold it down with wooden blocks. Then slowly unfold the carpet and flatten it while laying it until the other end of the wide edge of the carpet is in place.

Floating paving method is generally used for local carpet laying, and adhesive paving method can also be used for large area.

If the carpet has flat seams, the edges of the carpet should be arranged closely at the flat seams to avoid overlapping. There should be no extended flat-fell seam in the room.

The trimming of the whole carpet should be at the root of the wall.

If the carpet is smooth or upside down, it should be noted that the hair of the carpet should be in one direction when laying.

The carpet at the door or in an empty ring should be pressed with aluminum alloy or copper bead, and the bead should be fixed on the ground.