Fixation of aluminum alloy window lock Installation knowledge of aluminum alloy window lock

I believe everyone has done a lot of homework in anti-theft. There are related introductions about security doors and fingerprint locks, and I think everyone knows something about them. So everyone has heard of door locks. Have you ever heard of window locks? I think most people are as stupid as Bian Xiao. The door is locked normally, but it is really strange that the window is locked. Next, Bian Xiao will show you the relevant contents of aluminum alloy window locks.

Fixation of aluminum alloy window;

(1) When the iron parts are embedded in the wall, the iron feet on the aluminum alloy window frame can be directly welded with the embedded iron parts on the wall.

(2) When there is no embedded iron piece on the wall, the iron foot of aluminum alloy window can be fixed on the wall with metal expansion bolt or plastic expansion bolt. Concrete wall can use nail gun to fix the iron foot of aluminum alloy window on the wall.

(3) When there are no embedded parts on the wall, you can also use an electric hammer to drill a hole with a diameter of Φ 6mm on the wall, use an L-shaped Φ 6mm steel bar with a depth of 80 mm× 5 omm, stick 107 glue and mud on the long end, and then drive it into the hole. 107 after the final setting of glue slurry, the iron feet of aluminum alloy doors and windows are welded firmly with embedded φ6mm steel bars.

Treatment of the gap between window frame and wall;

(1) After the aluminum alloy window is installed and fixed, the concealed works shall be accepted first. After passing, the gap between the window frame and the wall should be handled in time according to the design requirements.

(2) If there is no requirement in the design, mineral wool or glass wool felt strips can be used to fill the gap between the door window frame and the wall in layers, and a notch with a depth of 5 ~ 8 mm should be left on the outer surface to fill the sealant. It is forbidden to use cement mortar for filling.

Aluminum alloy windows are divided into left and right sliding windows and casement windows.

There are two kinds of anti-theft locks for left and right sliding windows. It's usually a simple crescent lock. Screw them in with self-tapping screws. There is also a link lock, which requires you to open the keyhole before assembling the frame. You can usually ask the material store to open a hole for you. If you open it yourself, you can also open it if there is a perforated membrane. This kind of locking hook is generally installed on the side frame. The same is true for casement windows, one is to lock and knock directly; There is also a link lock, which needs to be punched first.

It is the place where the manual linkage lock is broken. The best way is to repair and replace 1 hardware. If not, you have to remove the handle and have a look (some handles have a decorative cover on the front and screw holes under the decorative cover; Have a plenty of glass to remove the handle from the inside), can you restore the linkage to its original state and open the window sash?

The above content is a wonderful introduction of aluminum alloy window lock. I hope every reader can hear it and apply it to real life, and you will benefit a lot. Ok, the introduction of aluminum alloy window locks is here today. Thank you for reading this article, and for your strong support and love for Bian Xiao. Want to get more information about home improvement, please continue to pay attention.