How to install fishing line chandelier How to install fishing line chandelier

When we walk into a hotel or clubhouse, we can't help but be drawn to chandeliers. We didn't want to leave after watching it. The fishing line chandelier is the most beautiful and has a very special style. There are several wires hanging from it, which looks very light and improves the overall layout of the interior. I think many people are interested in installing fishing line chandeliers. Then you can learn about some installation procedures of the fishing line chandelier. It looks like a lot of words, but it’s actually relatively simple to install.

1. Definition of fishing line chandelier installation

(1) The chandelier is hung by wires or iron supports. It cannot be hung too low to block people's normal sight or make people feel Dazzling.

(2) Take the chandelier in the dining room as an example. The ideal height is to form a pool of light on the dining table, but it does not block the sight of everyone on the table looking at each other. Nowadays, chandelier hangers are equipped with springs or height adjusters, which can suit different floor heights and needs.

2. Fishing line chandelier installation process

1. First prepare installation tools, such as electric drills, scissors, screwdrivers, soft rulers, leads and other tools. After preparation, disassemble them first Check the accessories and parts inside the fishing line chandelier package. If there are no problems, you can continue to the next step.

2. Unpack the accessories and pour out the parts inside. There is an optional crystal inside. Don’t break it. Put it away first. Put the screws together and put them aside.

3. First open the organizational part of the fishing line chandelier. In order not to leave fingerprints, you can now put on gloves on your right hand, then take out the screws inside, adjust it to the top of the screw pile, fix it, and rely on it. Hand tightening is unreliable and requires retightening with a small wrench.

4. Turn the small disc over and fix the screws on its back. Try not to touch the chassis with your hands. If you do, you can wipe off the fingerprints with a tissue.

5. After installing a part, you can test the power first to see if it can be powered on. Use a torx screwdriver to connect the connection to the card slot, then stand on a chair of a certain height and connect the cables on the ceiling. interface, be careful not to slip. First turn on the control switch of the chandelier and find that the light is on, then there is no problem.

6. Use a point drill to drill holes near the chandelier interface on the ceiling according to the required distance and size, and take out the four screws that fix the chandelier. If you are alone, you need to pick up the entire lamp first. , align the chassis with the small holes on the ceiling, and fix them one by one with screws.

7. Take a pair of scissors to remove the other packaging of the chandelier, adjust the actual height of the chandelier on the chassis, check whether there are fingerprints on the edge of the chandelier, wipe it clean, and finally tear off the film of the lamp , the installation is completed.

In order to deepen everyone’s impression of the installation of fishing line chandeliers, we first analyze the definition of fishing line chandeliers to give you a general idea, and finally describe the installation process of fishing line chandeliers in detail. The installation process of the fishing line chandelier is relatively simple, with a total of seven steps. As long as you use the above method, there is basically no problem.