What if the socket is too loose? How to prevent the socket from being too loose

1, the socket is too loose, which is generally caused by the loose copper sheet inside the socket. At this time, you should pry open the socket shell with a tool, then unscrew the screws around the socket with a screwdriver, then open the black insulating cover inside the socket, then take out the copper sheet inside, clamp it, and finally install the socket in the reverse order of the previous disassembly.

2. Before the socket is repaired, be sure to turn off the main power supply at home to avoid electric shock. After the copper sheet is clamped, if there is a lot of dust and dirt in the socket, you can also clean it up by the way to avoid affecting the contact effect of the socket. After the socket is repaired, it can be connected to the power supply and used normally.

3. It is suggested that when plugging and unplugging the plug in our daily life, we should try our best to grab the position of the plug for plugging and unplugging, and never grab the position of the wire, otherwise it will easily lead to the disconnection of the wire and the plug or the loosening of the socket.

In the process of using sockets and plugs, everyone must pay attention to the safety of electricity use. Do not repair the socket or plug without taking appropriate protective measures, otherwise it will easily lead to electric shock accidents. In addition, the current through the line should generally not be too large, otherwise it is easy to cause the plug to melt and loosen due to high temperature. At this time, turn off the power supply in time and let the plug cool slowly.