What is the lever size? Wait online! ! ! !

Some bar bars are connected with wine storage cabinets. The size of a lever like this is generally 80cm-850cm. In case of American or Nordic style, the size of the bar bar connected to the wine storage cabinet is110cm-125cm. At this time, the height of bar stool should be 60cm-75cm.

2, bar bar size specification 2

The bar consists of three parts: the front bar, the operating table and the rear bar. The height of the bar is 1m- 1.2m, but the height of the bar is not absolute, and it is mainly made according to the height of the bartender. The size of the console under the front bar is generally 76cm, but it is not static, depending on the height of the bartender.

3, bar bar size specification 3

In addition to the front bar and console, there is also the back bar, which is the place to store wine. The size of the rear bumper is generally above 175cm, but the top of the rear bumper should not exceed the reach of the bartender, and the height of the lower bumper is generally around 1 10cm, or the same as that of the front bumper.

4, bar bar size specification four

The size of the bar is not only related to the style, front bar, operating table and rear bar, but also related to the distance from the front bar to the rear bar. The distance from the front column to the back column is generally about one meter, which is the aisle of the staff. There should be no other equipment protruding into the aisle here, so as to ensure the safety of the staff.

Extended data:

Matters needing attention in lever design:

1, the location will certainly affect the circuit and water supply and drainage design, especially in the corner far away from the pipeline or drainage pipe, drainage has become a big problem. The drain pipe should have a certain inclination angle. If the bar is close to the outside, you can connect the drain pipe to the outside and drain it with a separate pipe;

If it is necessary to connect the pipes between pipes and the inclination is insufficient, the pipes must be installed from the ceiling or wall, which will make the construction more troublesome and the cost will increase accordingly.

2. If you want to use electrical appliances with high power consumption in bars, such as induction cookers, you'd better design a separate circuit to avoid circuit tripping.

3. When buying a sink, you should pay attention to bars with sinks. The sink should be flat-bottomed, so that the cup will not fall or be damaged when it is placed. The depth of the sink should be above 20cm to avoid splashing everywhere.

4. The design of the wine cabinet should pay attention to the convenience of use. The height of each floor should be at least 30-40cm, and the part where the wine bottle is placed should be designed to be placed obliquely, so that the wine can overflow the cork and the wine can be stored for a long time; The depth of the cabinet should not be too deep. It's inconvenient to straddle other objects with a cup.

5, the countertop is best made of wear-resistant materials, and the skin is not suitable. The bar with sink is best waterproof; If electrical appliances are used in bars, refractory materials are the best, and artificial stone, melamine board and stone are all ideal materials.