Should every room be painted flat in the hotel completion drawing?

As-built drawings According to relevant regulations, it is not necessary to draw a flat elevation for each room.

General as-built drawings can be divided into the following forms:

1. redraw as-built drawings with electronic construction drawings;

2. Use the construction blueprint to redraw the as-built drawing;

3. Repaint the as-built drawing with the resurfaced sulfuric acid paper base map;

4. redraw the as-built drawing.

Usually, it is a as-built drawing redrawn using the blueprint of the construction drawing. The redrawn as-built drawings shall meet the following requirements:

1. Durable writing materials such as carbon ink and blue-black ink should be used, and easily faded writing materials such as red ink, pure blue ink, ballpoint pen, carbon paper and pencil should not be used. The handwriting is clear, the pattern is clear and the chart is neat.

2. Draw with bars (strokes) or forks;

3. Indicate the modification contents in the modification part, and make a remark table of the modification contents in the blank;

4. When there are many changes in the drawings, the as-built drawings shall be redrawn.

5. All as-built drawings shall be stamped with the as-built stamp, and the size of the as-built stamp shall be 50 mm× 80 mm. The blank space above the icon bar shall be covered with indelible inkpad, and the signature and seal procedures shall be complete.