How to Install and Dismantle Drawer Slide; Installation and Dismantling Skills of Shaoyang Home Decoration Drawer Slide

Drawer slide rails are generally installed in two ways, one is side-mounted and the other is bottom-mounted. The side mount is installed on the side of the drawer. Now most of the slide rails are side mounted, that is, mounted on the side rails. Of course, there are also some sliding rails like wardrobes and cabinets that are installed at the bottom, that is, at the bottom of drawers. Shaoyang decoration network reminds that the use methods are different, but the installation skills and principles are the same.

The number of installation sections of drawer slide rail can be divided into 1, 2 and 3 sections. Different drawer sizes are equipped with different drawer slide rails, and the installation skills of slide rails with different sections are similar. After all, slide rails are used in drawers.

The following introduces the installation and removal skills of the side of the three drawer slide rails.

Step 1: Assemble and fix the drawers. Select the drawer to install the slide rail. The panel of a drawer is used to install the handle, so the front should face outwards.

Installation skills of drawer slide rail Step 2: Prepare the installation tools such as slide rail, screwdriver and screw to be installed, and divide the slide rail into two parts according to the disassembly card of three slide rails of a drawer. One part is installed on the cabinet and the other part is installed on the drawer. Sliding rails with screw holes on them can be distinguished according to this. The slide rail with narrow surface is installed on the side of drawer, and the wide part is installed on cabinet. Pay attention to the difference between before and after, and you can rely on the lines of the slide rail.

Installation skills of drawer slide rail Step 3: Install the cabinet part of drawer slide rail. According to the position of the holes, screw the screws on the surface of cabinets such as bedside tables. Use two screws matched with the slide rail to connect the slide rail and the cabinet board smoothly, and install and fix them in series. Slide rails should be installed on both sides of the cabinet surface. Align the slide rail of the drawer with the slide rail of the cabinet, and you can pull it back and forth.

The technique of removing the drawer slide rail is simpler. Pull the drawer to the outermost part and see a button similar to a toothpick on the slide rail of the drawer part. Just push it up slightly, then slowly move the drawer out, and the drawer slide rail can be removed soon.