How to clean the soap dispenser?

After the soap dispenser is used for a period of time, dust or water stains are unavoidable and can be cleaned as new at any time. This article will share the maintenance skills of soap dispenser. How to clean the soap dispenser?

When using the soap dispenser for the first time, add clean water to drain the vacuum inside, and then add soap.

In the process of frequent use, the soap dispenser may be blocked by dust and impurities, so it should be cleaned frequently.

The soap dispenser is often in a humid environment, and its surface should be wiped with a clean rag frequently, otherwise the shell may degenerate and discolor in such an environment.

Some soaps may condense in the soap dispenser after being left idle for a period of time. If the amount of soap is small, it can be stirred with warm water and the soap can be reduced to liquid. If the above method is not feasible, take out the condensed soap, add warm water, and use the soap dispenser for many times until the warm water flows away from the soap dispenser, so that the whole soap dispenser can be cleaned. Doing a good job in the maintenance of the soap dispenser can not only save the economic cost of the hotel, but also let the guests enjoy the best service when using it, which is very helpful to the overall impression of the hotel.

Maintenance method of soap dispenser

1. When using the soap dispenser for the first time, add clean water to evacuate the internal vacuum. When adding soap, in addition, when using the soap dispenser product for the first time, there may be some clear water in the bottle and pump head. If you have this problem when you use it for the first time, don't worry, because it is not the quality problem of the product, but the problem left over from the factory inspection. Of course, not necessarily. It's possible.

2. If the soap in the soap dispenser is too thick, it may hinder the discharge of the soap dispenser, so in order to dilute the soap, just add a little water to the soap bottle of the soap dispenser and stir it, and the liquid can be discharged.

3. Dust and impurities in the soap will block the liquid outlet, so if you notice that the soap in the soap bottle of the soap dispenser has deteriorated, you should replace the soap in time to avoid the trouble of blocking the liquid outlet of the soap dispenser.

4. If the soap dispenser is left idle for a period of time, some soap may coagulate. At this time, it can be solved by the following methods: (1) If the amount of soap is small, it can be stirred with warm water to turn the soap into liquid; (2) If the above methods are not feasible, take out the condensed soap, add warm water, and use the soap dispenser several times until the warm water in the soap is removed.