In the hotel, the power suddenly went out! How do I start the generator to generate electricity? Please explain the detailed process.

If the power supply stops, you should follow the following steps: 1, first disconnect the main gate of the power supply. 2. Check whether the generator water, engine oil and fuel oil are sufficient, and replenish them when insufficient. 3. Then start the electric oil pump (some are manual oil pumps, some are very small), and stop the electric oil pump 4 when the oil pressure reaches above 0.4MP. Start the motor and add a little throttle. After starting, check whether the generator leaks water or oil. 5. If there is no leakage, increase the throttle to the rated speed. At this time, check whether the voltage, frequency, oil pressure, water temperature and oil temperature are normal and rated (three-phase voltage is 400v, frequency is 50Hz, oil pressure is about 0.8MP, and water temperature and oil temperature do not exceed 80℃). 6. After normal, close the generator main brake and send it to the switchboard, and then send it to each room. At this time, it is necessary to check whether the generator voltage, frequency, oil pressure, water temperature and oil temperature are loaded.