What should I do if I take the blame?

Treatment method of black pot after dry burning:

1, beer and white wine are all good things to clean the bottom of the burnt pot.

You just need to mix the liquor, beer and water at the ratio of 1: 1:0.5, then cover the pot, let it stand for 5 minutes and then clean it, which will become very easy.

2. Apply toothpaste and wipe it with a cloth dipped in water, which is economical and does not hurt the pot, but wiping may take some effort.

3. Soak in high-concentration sodium hydroxide aqueous solution (such as 100g water and 50g sodium hydroxide, which are highly corrosive, so acid alkali resistant gloves must be taken and cannot be used for cleaning aluminum products), and then scrape with steel wire balls.

4. Boil water in the pot, add a small amount of detergent, cover the pot, leave it overnight, and then scrub it off.

5, baking soda soaked clean. The solution is weakly alkaline, and its particles are soft crystals with hardness similar to that of human nails or gold. After wetting with water, the edges and corners of the crystal can be melted.

Therefore, as a friction agent, it can not only remove the dirt on the surface of the appliance, but also cause no damage to the pot, which is much milder than toothpaste and salt.

6. Put the rag in water with white vinegar, soak it, turn the bottom of the pot up, and spread the rag dipped in white vinegar. Where there is discoloration, it should be painted in which position.

Apply for all positions. After about 30 minutes, remove the dishcloth at the position of the pot shell, and then remove the bottom part of the pot for another 30 minutes.