How to paste 1m 5x750 tiles in the corridor?

1 First, prepare tile adhesive, three-hole glass suction, serrated plastering, ash spoon, rubber hammer, guiding rule, leveling clamp sleeve and rag.

2, surface treatment at the grass-roots level to remove grass-roots floating ash, oil and other stains, so as not to affect the bonding of ceramic tile adhesive. The interior of the base surface must be flat. Where the surface is rough or uneven, cement mortar can be used to smooth it. At the same time, the construction base surface should be fully wet to prevent empty drum.

3. Preparation of ceramic tile binder: The ceramic tile binder is mixed with water in the ratio of 4: 1, and stirred with a ash spoon until it is lubricated evenly without obvious caking or paste caking. Let the stirred slurry stand for 5- 10 minutes, and then stir it slightly for 1-2 minutes before use.

4. Apply ceramic tile adhesive, evenly spread a layer of ceramic tile adhesive on the ground to form a semi-dry layer, and then add ceramic tile adhesive on the concave and convex parts of the surface with a thickness of about 0.5CM.