Traditional Culture Encyclopedia - Hotel franchise - Iphone6 uses wi-fi to enter the correct password in the hotel, but it can't connect.

Iphone6 uses wi-fi to enter the correct password in the hotel, but it can't connect.

1. Connect to WIFI with your mobile phone. After the initial connection is successful, a network IP address assigned by the WIFI connection will be reserved in the mobile phone and applied to the current WIFI. If there is no address conflict, you should be able to surf the Internet normally, but if there is IP conflict, you can try to solve it through the above methods. ▍ Second daung: Settings-General -WLAN- Select wifi with abnormal connection-Right-click the icon of WiFi signal to cancel saving-and then re-enter the password to reconnect, so that the mobile phone can get a new address and connect normally.

2. If the WIFI connection is still in the verification stage and cannot be connected normally, it is necessary to check whether the WIFI password is entered correctly, whether the WIFI password has been changed or whether the router's security rules are set correctly. After the WIFI password is changed, the mobile phone cannot be connected, and the WIFI password needs to be updated manually. The WIFI password was entered incorrectly, so you need to re-enter the WIFI password manually. You can refer to the second duang: Settings-General -WLAN- Select the WIFI with abnormal connection-Click the icon of the WiFi signal on the right-Click Cancel Save-and then re-enter the password to reconnect, so that the mobile phone can get a new address and connect normally.

3. If the above three duang fail to solve the problem successfully, we can try to check the advanced settings of WLAN on the mobile phone. Settings-General -WLAN- Select and hold an abnormally connected WIFI-Select Modify Network-Display Advanced Selection View and change proxy and IP settings according to router security rules. In most cases, the proxy and port settings will not change, but there is always nothing wrong with choosing to check these items when there are common problems with WIFI.

4. If the default settings can't be connected normally, then we need to consider or check whether there may be a problem with the DHCP address allocation on the connected router, or whether the device has obtained the wrong IP address. We can find the following settings: Settings-General -WLAN- Select WIFI with abnormal connection and long press-Select Modify Network-Display advanced options-Change IP settings to static, and then enter relevant parameters according to routing settings.

We should note that setting a static IP address may not be applicable to all routers. If you can't surf the Internet normally by switching to other WIFI environments, we may need to restore the default settings or make appropriate modifications according to the router settings in the current WIFI environment.

Other methods:

When we encounter that a certain WIFI can't be connected normally and other WIFI can be connected normally, we can try to use duang above to solve the problem, or we can see if there is something wrong with the router or broadband.

Check whether the connection between network cable and router is normal;

2. Check whether the broadband is normal. We are not sure about this ourselves. We can contact the network provider, such as 10000 of Telecom.

3. Restart the router;

4. View and modify the relevant settings on the login routing WEB configuration page (common router configuration login address:192.168.1192.168.0./kloc-0.

If the confirmation type is selected correctly and the account password is entered correctly, we can also try to check and modify the settings of DHCP server and IP and MAC filtering rules appropriately.

reference data

The phone even entered the wifi password correctly, but it just couldn't be connected! Personal library [reference time 20 17- 12-22]