What is the cantilever length of the hotel awning?

The cantilever length of awning is generally 0.9-1.5m. According to different structural forms, awning has plate type and beam type. The thickness of the root of the board canopy is not less than 70mm, and the thickness of the board end is not less than 50mm.

When the picking length exceeds 1.5m, reliable anti-overturning measures should be taken. In the design of business hotel, in order to ensure the safety of balcony, there are certain requirements for the height of balcony railings or handrails, and the requirements for low-rise and multi-storey buildings are not less than1050 mm; ; High-rise buildings should not be less than 1 100mm, but should not be higher than1200 mm; ; Railings within 0/00 mm from the ground and roof/kloc-should not be left blank.

Matters needing attention of hotel awning

Automatic submerged arc welding is a common welding process after the assembly of steel structure ceiling. Full penetration welding is a welding method for welding joints. In the welding process, the weld strength is high and the quality is stable. Automatic submerged arc welding is a method called arc welding, which has arc combustion in flux layer.

Automatic submerged arc welding technology has outstanding advantages, high welding quality and good air protection. In addition, welding parameters can be automatically adjusted to maintain stable welding composition and remarkable mechanical properties.