Traditional Culture Encyclopedia - Hotel franchise - What kind of waterproof material is the best for the interior wall of the house?

What kind of waterproof material is the best for the interior wall of the house?

Generally only 1. Silicone waterproofing agent and 2. Mortar waterproofing agent is used in home decoration. Waterproofing agent has no toxic threat to human body. The specific steps are as follows: 1. Buy a bottle of liquid (silicone) waterproofing agent, mix cement powder with clean water according to the ratio of 10 kg to form cement oil, then add 0.3 kg of liquid waterproofing agent, and brush the wall for 2-3 times, so that the waterproof protection of the wall can be done well. 2. Buy more than two bottles of sand oar waterproofing agent, and add it to cement mortar according to the instructions, which will be used as a batch of mortar walls. 3. Liquid (silicone) waterproofing agent should also be added to cement oil with magnetic sheets. There is no sand paddle waterproofing agent, so you can use (silicone) waterproofing agent. In fact, it is basically the same. After adding waterproofing agent to the cement paddle, it will soon become hard, and a small amount should be added.

1.JS composite waterproof coating (1) is suitable for seepage prevention, leakage prevention, waterproofing and anticorrosion of various water towers, pools, water tanks, puddles and sluices. It is the first amphibious product with waterproof and anticorrosion in China, which can be used in tap water and drinking water pools (with non-toxic test report). The long-term immersion life of coated JS composite waterproof coating can reach more than 30 years. (2) JS composite waterproof coating can be used for waterproofing of various sewage tanks, with convenient construction, beautiful appearance and wear resistance. (3) It is suitable for waterproof and anticorrosion of various cooling towers and cooling towers, and can also play an anti-freezing role, and the service temperature can reach-150℃ ... In outdoor engineering, it is also equipped with ultra-strong anti-ultraviolet PHA topcoat. (4)JS composite waterproof coating can also be used for household waterproofing because of its waterproof effect and environmental protection. For example, Leibangshi JS flexible waterproof mortar is a product specially produced for family waterproofing.

3.PHA 106 —— Special anti-corrosion coating: (1) is suitable for anti-corrosion of underground pipelines. (2) It is suitable for anticorrosion of floors, workshops, ceilings and workshop walls of chemical plants, printing and dyeing plants, chemical fiber plants, power plants and salt depots. (3) Corrosion protection of acid tanks, alkali tanks, material towers and warehouses in chemical fertilizer plants. (4) All kinds of antisepsis in food factories, wineries and breweries (non-toxic, with national health non-toxic report). 4. PHA 1 07 —— Special village material for floor decoration and anticorrosion: (1) It is suitable for floor and wall decoration of large industrial workshops in machinery, electronics, light industry, textile, automobile, medicine, food and other industries. (2) It is suitable for moistureproof, mildewproof, anticorrosion and decoration of various wood products. (3) It is suitable for moistureproof, mildewproof, waterproof and anticorrosion in cigarette factories, grain depots and vaults. Meiling coating PHA series is applied to the surface of cement concrete, and the dosage is 0.4 kg per square meter, and the surface of steel structure is about 0.3 kg per square meter. Important parts can be coated with one cloth, three coats, two cloths and five coats (the dosage of one cloth and three coats per square meter is 1 kg, and the dosage of two cloths and five coats is about 1.5 kg).

2.PC-type high-temperature resistant coating: suitable for chimneys, flues, torches, high-temperature equipment, etc. (above 400°C), the dosage is 0.5 kg per square meter, with four coats.

3.PD type special anticorrosive coating (chlorosulfonated polyethylene type): 1. PD 1 13 chlorosulfonated polyethylene anticorrosive coating with five layers, two bottoms and two sides, dosage per square meter 1 kg. 2.PD 1 14 anticorrosive coating with rust PD 1 15 anticorrosive coating with anti-crack and anti-ultraviolet ray PD 1 16 anticorrosive coating for pipeline PD17 anticorrosive coating for gas holder, per square meter. It is suitable for corrosion protection of various indoor and outdoor steel structures, pipelines, gas holders, oil irrigation, external walls and equipment, as well as chemical fertilizer plants, chemical workshops and workshops.

4.PE-type fangci paint: It is suitable for decorative waterproofing of residential buildings, office buildings, internal and external walls, and waterproofing and seepage prevention of bathrooms, kitchens and swimming pools. It can also be used for anti-corrosion decoration of industrial workshops. Brush for three times, with a dosage of 0.5 kg per square meter.

5.PE roofing and waterproof material: 1. PM 108 Chloroprene waterproof glue: It is suitable for waterproofing of various factories and residential buildings, with two layers of cloth and six layers of coating, and the dosage is 2kg per square meter. 2.PA 108 Elastic Polyurethane waterproof glue: Suitable for all kinds of roofing and waterproofing, with the dosage of 1.6kg per square meter, one cloth and three coats. 3.PM 1 10 Roof waterproof glue: It is suitable for waterproofing of old and high-grade roofs, with one cloth and four coats, and the dosage is 2kg per square meter. 4.PM 109 Advanced Joint Filling Ointment: It is suitable for repairing all kinds of building cracks, and is waterproof for joint filling of roof expansion joints, structural joints, pools and joints.

6.PF 109 Special antistatic coating for oil irrigation: suitable for oil storage irrigation. Special antistatic coating is suitable for oil storage irrigation. Inner wall (including gasoline, diesel oil, kerosene, crude oil, aviation oil, etc. ) anti-static, with absolutely reliable safety and anti-corrosion effect. Spray for 3-5 times, and the dosage is 0.8kg per square meter.

H88- 1 Epoxy Rust Coating: It is suitable for corrosion protection of various steel structures, without sandblasting, with convenient construction and good corrosion protection effect. H88- 1 primer shall be painted twice, and the dosage shall be 0.4kg per square meter. H88-2 topcoat shall be painted for three times, and the dosage shall be 0.6kg per square meter.

Eight, PL pipeline heavy anti-corrosion coating (i.e., epoxy asphalt coal tar coating):

It is suitable for anticorrosion of various underground oil, gas and water pipelines, and can be coated with one cloth and two cloths, with good electrical insulation. The dosage per square meter is about 0.8- 1.0 kg (the dosage will increase proportionally according to the film thickness).

Nine, PL chlorinated rubber anticorrosive coating:

It is suitable for anticorrosion of various steel structures, cement structures, bridges and ships. Brush three times, the dosage is 0.4 kg per square meter.

10.JC alkyd enamel anticorrosive coating: It is suitable for anticorrosion of various steel structures, with the dosage of 0.4 kg per square meter and brushing for 3-5 times.

XI。 JA60 series fire retardant coatings: 1. Ja60-1is suitable for cable and building fire protection. JA60-2 is suitable for fire protection of indoor steel structures, grid structures, interior walls of buildings, warehouses, cigarette factories, hotels and ceilings, as well as various cement structures, wood structures and fire protection decorations. Brush for 3-5 times, and the dosage per square meter is about 1.5 kg. 2.JA60-4 is suitable for fire prevention of indoor and outdoor buildings. Brush (spray) for 3-5 times, the film thickness is 3-5 mm, the fire resistance is about 1.5 hours, and the dosage is about 4kg/m2. It is an advanced ultra-thin fire retardant coating in China.

12. Instant plugging agent for waterproof plugging (also known as impervious plugging agent): mainly used for quick plugging and water stopping in mines, tunnels, culverts, underground buildings, canal dams, pools, toilets, etc. It can be prepared into mortar or concrete for structural anchoring, equipment foundation anchoring grouting, retention, well cementing and engineering emergency repair.

Thirteen, fire blocking series: WZHⅰ flame retardant materials (flame retardant package) and WZHⅱ flame retardant materials (inorganic blocking materials) are ideal fire blocking materials in electric power, metallurgy, chemical industry, posts and telecommunications and other departments, and are the first choice products to prevent cables from burning. FFD-I composite cable fireproof plugging material. It is a kind of fireproof plugging material with strong adaptability and can be disassembled and reused. No need for secondary fire fighting investment. FQW-I cable flame retardant trough plate can be used at -20. C70 .c Temperature and humidity, including salt fog, chemical gas and other environmental conditions, achieve the purpose of cable fire prevention in power plants, substations, industrial and mining enterprises and other places with dense cable noise. The fireproof partition door of FDM No.1 cable tunnel has played an extremely important role in restraining the spread of fire, protecting personnel safety and evacuation.