Midea Hotel Water Heater Fault Code

The failure codes of water heaters used by Midea Hotel mainly include the following types:

1.E 1: The water temperature sensor of the water heater is faulty, which may be due to poor contact or damage of the sensor. You can try unplugging the connecting cable or replacing the sensor.

2.E2: The heating pipe of the water heater is faulty, which may be caused by the aging of the heating pipe or the blockage of impurities. Try cleaning the heating pipe or replacing the damaged heating pipe.

3.E3: Overheating protection of water heater is mainly caused by long working hours or high water temperature of water heater. You can wait for the water heater to cool itself before restarting.

4.E4: The water consumption of the water heater is abnormal, which may be caused by water leakage or low water pressure of the water heater. Should be timely maintenance or adjust the water pressure to solve.

5.E5: The temperature controller of the water heater is faulty, which may be the fault of the controller chip or the poor contact of the connecting wire. Try reconnecting or replacing the controller to solve the problem.

The above is the common fault code of Midea hotel water heater. If it breaks down, it needs to be repaired or replaced in time to ensure the normal operation of the hotel. At the same time, it also needs regular maintenance and inspection to reduce the possibility of failure.