What is the reason why the toilet doesn't run out of water?

First, the toilet button is empty when pressed.

1. The toilet button is broken, and it will be empty when pressed. It is necessary to replace the toilet button. Before replacing the button, please empty the water in the toilet tank, close the water valve of the toilet, and then remove the water tank cover.

2. Turn the nut of the button counterclockwise by hand to remove it, then take out the broken button, put in a new button, put down the water tank cover and tighten the nut clockwise.

3. There is a plastic stud on the button, which is connected with the flush button through thread. Adjust the height and then lock the nut. If the position of the new button stud is long, cut off the long part with pliers.

4. Then open the water valve of the toilet, let the water pour into the water tank, put the toilet lid back in place, and try again when the water is full.

Second, if the toilet is pressed, it will not flush if it is not pressed.

1. When there is no pressure when the toilet button is pressed, it may be that the vent hole of the toilet is blocked by a foreign object. The foreign body in the vent hole needs to be cleaned up before the toilet can return to normal.

2. If the toilet doesn't press down, it may be that the toilet water is blocked. You can try flushing the bolt with the toilet in the toilet first. If it is only slightly blocked, it will generally be unblocked. When the toilet water is clear, the pressure will naturally come back.

3. If there is still no pressure after using the toilet plunger, it may be a serious blockage. You can try the pipe dredge. Generally speaking, foreign body blockage can be dredged by pipe dredge.