How to draw a house plan with cad

Step 1: Run and open "AutoCAD" installed on the computer. The AutoCAD version used here is 2007.

Step 2: Enter the software to understand the functions of the toolbar and tool panel, so there is no need to say more here. Draw a straight line by directly referring to the design sketch.

1. Select the line that makes up the toolbar, click to select it, and then select the length and angle to draw.

2. Or you can quickly draw a straight line by inputting the shortcut command L at the low end.

Note: When drawing a straight line, select the "Orthogonal" function here to open.

Step 3: The wall on the plan is generally represented by two lines. At this point, you can select the "offset" function to change a single line into a double line.

Step 4: The next step is to reuse the offset tool to draw other walls and line segments.

Step 5: After the image drawing is completed, the labeling function will be used. Click the toolbar on the right to make a selection. If the toolbar has no labeling function, it needs to be called out.

Method: Right-click the blank area of the toolbar, find the ACAD, select the tab, and then click.

Step 6: The following is the labeling operation. Here you need to set the functions of "object capture", vertical foot, breakpoint, endpoint, center of circle, node, intersection point and so on. Right-click "Object Capture" and check Open!

Step 7: After marking, just design the drawings perfectly. For example, some small building materials in dwg format can be used directly. If you want them, you can leave a message.