How is the bathrobe illustrated?

How to draw a diagram of a bathrobe

How to draw a diagram of a bathrobe? Only by flexible and changeable collocation can you find a suit for yourself, so you must start from your own conditions, give full play to your own advantages, and learn how to match colors, which is perfect. The following is a diagram of how to share bathrobes. How to fasten a bathrobe 1

1. How to fasten a belt

● Sew the belt on the clothes

If the belt of your robe is sewn on the clothes, as shown in the following figure, when you wear it, just cross the belt at the back, then wrap it around the front and fasten it ~

● There is also a kind of bathrobe with separate belts

. Generally, this kind of clothes has two small holes at the waist side, as shown in the following figure.

It's ok to string the belt into the small hole and then tie a knot in front of it ~ (If you think it's too long to wrap the belt around only once, you can wrap it around again)

2. Three-strap method

Generally, this kind of nightgown has two short belts on the inside and the outside. There are two small holes on both sides of the waist of the pajamas, as shown in the picture below. The two ropes inside are used to tighten the robe and prevent it from running away, and the outer belt is used to tie the clothes. When you tie it, you need to tie the two short straps inside first, and then tie the long strap outside through the small hole in your waist. How to tie a bathrobe 2

1. Bow tie method: first, grasp the central part of the belt with your right hand to align it with the center line of the bathrobe, and then wrap the belt of your right hand around your waist once, so that the belt will look long on the left and short on the right at this moment. Next, fold the left belt into a triangle, and then cross the two belts, paying attention to the length above and the length below. Tie a knot at the upper edge of the belt and improve the binding. Fold the long ribbon and make a bow. Then tie the short belt and the long belt into a bow. Adjust the shape and position of the bow and pull the whole bow to the back.

2. Rose tying method: the short end of the belt is folded in half, the folded part of the short end is taken as the center point, and the long end is wound with the short one to make petals. After winding several times, a prototype of a rose will appear. Finally, remember to tighten it to fix the rose.

3. Tie it at will. If you think that the bathrobe doesn't need too many gorgeous decorations, it's okay to simply tie it at will, as long as it is stable. The general tying method is that the belt passes through the buttons on both sides, and then it can be tied at the waist. How to make a bathrobe? Diagram 3

The first one is a little on the front side of the clothes, and it is a cross belt that naturally hangs down. This is also the simplest method.

The first method is very easy to loosen. Suitable for samples or models to wear for a short time. For working people, we need to use the second method. Type two tens of bytes on your front side. This thin section is tight and not easy to loosen, which is suitable for commuting to work.

The third tying method is to open a button hole at one end of the belt, and then buckle it with one end, and the other end naturally hangs down. This tying method is more casual. Casual style.

The fourth method is to tie a single-button bow right in front of you, which is looped on it, and the two straps hang down one long and one short.

The fifth way is to tie a bow in front of you. This kind of knot is also stronger.

the sixth method is to install two metal buckles at one end of the belt, and fasten the belt with the metal buckles, and tie the extra part in the belt. This method is more handsome.

The seventh tying method is a seemingly random tying method, which is to fasten the belt head inside the belt again after fastening it.