How to adjust the rubber-tyred presser foot to eat cloth?

The adjustment method of rubber tire presser foot eating cloth is as follows:

1. Make sure that the machine is turned off and the power supply is turned off to ensure safety. Check whether the rubber tire presser foot is in contact with the cloth, and check the adjusting screw of the rubber tire presser foot.

2. Adjust the adjustment screw gradually, and gradually turn the adjustment screw as needed, so that the rubber tire presser foot can be adjusted downwards and contacted with the cloth. During the adjustment process, you can test with a test cloth, put the test cloth under the machine, and then turn on the machine to observe whether the rubber tire presser foot is in close contact with the test cloth.

3. If the rubber tire presser foot eats too much cloth, you can turn the adjusting screw counterclockwise to raise the rubber tire presser foot. If the rubber tire presser foot is not enough to eat cloth, turn the adjusting screw clockwise to lower the rubber tire presser foot. After adjustment, test again to ensure proper contact between rubber tire presser foot and cloth.