How to get to Shenzhen Railway Station from Shenzhen Tangxia Yongliangying Factory?

Bus route: m29 1 → Subway1→ Airport Line 330, with a total length of about 62.0 kilometers.

1. Walk about 300 meters from Liang Ying Electronics (Shenzhen) Co., Ltd. and arrive at Yongshekang Central Station in Tangxia.

2. Take m29 1, pass 4 stops and arrive at Songgang subway station.

3. Walk about 2 10 meters to Songgang Station.

4. Take the subway 1 1 line, pass 16 station and arrive at Futian Station.

5. Walk about 3 10 meters to the Investment Building Station.

6. Take the airport line 330, pass two stops and arrive at the Huashe terminal of the railway station.

7. Walk about 350 meters to Shenzhen Railway Station.

Driving scheme:

Driving route: the whole journey is about 57. 1km.

Starting point: Liang Ying Electronics (Shenzhen) Co., Ltd.

1. Start from the starting point to the southwest, drive along Tangxiayong Industrial Avenue 10 meter, turn around and enter Tangxiayong Industrial Avenue.

2. Drive along Tangxiayong Industrial Avenue for 340m, drive in the direction of Guangzhou/Dongguan /G 107 (northbound), and then turn right into Yangyong Road.

3. Drive along Yangyong Road 1.9 km, head for downtown/Xin 'an/airport/manhole, turn right slightly and enter Guangzhou-Shenzhen Highway.

4. Drive along Guangzhou-Shenzhen Highway for 5.3km, pass Dong Jun Building on the right about 100m, turn right slightly in the direction of Xinyu Road /G4/ Shajing North Ring Road, and enter the auxiliary road of Guangzhou-Shenzhen Highway.

5. Drive along the auxiliary road of Guangzhou-Shenzhen Highway for 4 10/0m, turn right slightly in the direction of Xinyu Road /G4/ Forest Park/Phoenix Mountain, and enter Xinqiao Overpass.

6. Drive along Xinqiao overpass for 570 meters and go straight into the North Ring Road.

7. Drive along the North Ring Road 140m, turn right ahead and enter the outer ring road.

8. Drive along the outer ring road 140m, drive in the direction of G4/G 15/ Shenzhen, and turn left slightly on the ramp.

9. Drive along the ramp 1.4km and go straight into Beijing-Hong Kong-Macao Expressway.

10. Drive along Beijing-Hong Kong-Macao Expressway for 39.0km and go straight into Beijing-Hong Kong-Macao Expressway.

1 1. Drive along the Beijing-Hong Kong-Macao Expressway for 40 meters and go straight into Huanggang Road.

12. Drive along Huanggang Road 1.7km, turn right slightly in the direction of Railway Station/Riverside Avenue (East) /S30/ Shenhui Coastal Expressway and enter the Riverside Huanggang Overpass.

13. Drive along the riverside Huanggang overpass for 300 meters, turn right ahead and enter the auxiliary road of Binhe Avenue.

14. Drive along the auxiliary road of Binhe Avenue for 240m, cross the Sinotrans Building on the right and enter the auxiliary road of Binhe Avenue.

15. Drive along the auxiliary road of Binhe Avenue for 80 meters, turn right slightly in the direction of Wenjindu/Railway Station/Binhe Avenue (East) and enter Binhe Avenue.

16. Drive 3.5km along Binhe Avenue, cross Binhe Baoan Interchange and go straight into Chuanbu Road Viaduct.

17. Drive along Chuanbu Road Viaduct for 30 meters, exit at Luohu Port/Railway Station (West)/Heping Road, turn right slightly and get on the ramp.

18. Drive along the ramp for 20 meters, cross Binhe Baoan Interchange, and turn left into Binhe Avenue auxiliary road.

19. Drive along the auxiliary road of Binhe Avenue for 2 10 meters and go straight into the auxiliary road of Chuanbu Road.

20. Drive along the auxiliary road of Chuanbu Road for 220 meters, cross the Yujing Building on the right, turn slightly right and enter Chuanbu Road.

2 1. Go along Chuanbu Road 100 meters, turn right ahead and enter Heping Road.

22. Drive along Heping Road 1.0km and reach the destination (on the right side of the road).

End point: Shenzhen Railway Station