What are the steps involved in wasteland cleaning?

The final requirement for land reclamation and cleaning is to ensure that there is no garbage in the room, no dirt on the doors and windows, no floating dust on the surface, no water stains on the ground, and no fingerprints on the mirror.

General steps for land reclamation and cleaning include:

1. Clean up the construction and decoration waste left on the site during the construction phase, such as cement blocks, silica gel, etc.;

2. Then use a high-power vacuum cleaner to completely remove dust from top to bottom, and clean corners and other places by hand;

3. Glass cleaning: first use a bristle wipe to apply the diluted glass aqueous solution, and evenly apply it from top to bottom Apply it to the bottom of the glass, and apply it several times to the severely stained areas. Then use a glass scraper to scrape it clean from top to bottom. Then use a dry towel to wipe off the water marks left on the frame. Wipe the water marks on the glass clean with a machine leather.

4. Bathroom cleaning: Use a wet towel dipped in detergent and wipe it from top to bottom, focusing on the dead corners left by land reclamation and cleaning, sanitary ware and stainless steel pipe fittings, etc., and then use a dry towel to wipe it in all directions. Wipe it over.

5. Clean the kitchen: Use a wet towel to wipe it all over again, focusing on the floor and corners, kitchen utensils and various stainless steel pipe fittings, and then repeat it again with a dry towel.

6. Bedrooms and halls: Use a vacuum cleaner to remove dust from the walls, and wipe lamps, switch boxes, smoke exhaust devices, air conditioning vents, etc.

7. Doors and frames: Distinguish the material of the door, dilute it with professional detergent, and wipe it with a towel. The procedure is also from top to bottom. After folding the towel into a square, start wiping the top from left to right. Any glue stains can be treated with glue remover; the procedure for the frame is the same.

8. Floor cleaning: The floor should also be divided into materials, whether it is wooden floor, ceramic tile, or stone. According to the material, choose a special detergent to dilute and start cleaning. Glue stains on the floor can be removed with a blade, and stubborn ones can be treated with glue remover.

9. Corner lines: Wipe with a towel and use a blade to remove various glue marks, paint spots, etc.