What are the stresses on the construction technology of carpet paving?

There are many stresses on the construction technology of carpet paving, and the following are some common steps:

1. Grass-roots treatment: the grass-roots layer for laying carpets is usually cement floor, or wood floor or other materials. The surface is required to be smooth, smooth and clean. If there is oil stain, it must be wiped with acetone or turpentine. If it is a cement floor, it should have a certain strength, the moisture content is not more than 8%, and the surface flatness deviation is not more than 4 mm.

2. line springing, square setting, division and positioning: line springing, square setting and division shall be carried out in strict accordance with the specific requirements of different parts and rooms in the design drawings, and the construction shall be carried out in strict accordance with the drawings if specified and required in the drawings. If there is no specific requirement in the drawing, it can be positioned and laid by centering and snapping lines.

3. Carpet cutting: according to the size and shape of the room, the carpet is cut into the corresponding size and shape.

4. Staining the barbed board tapestry strip: nail the barbed board on the ground, and then hang the carpet on the barbed board.

5. Laying padding: Laying padding under the carpet to protect the ground from abrasion or scratches.

6. Carpet laying: Carpet laying on the ground, splicing and fixing according to the design requirements.

7. detail handling and cleaning: handle and clean some details.