What are the anti-skid methods for bathroom floor tiles? What are the anti-skid steps?

We know that there is a lot of water in the bathroom. If it is a floor tile, it is better to choose a non-slip floor tile. Therefore, it is a problem that consumers must consider to choose the anti-skid characteristics of the floor tiles in the bathroom, but we know that there are still some methods to prevent the floor tiles in the bathroom from slipping. Here is a brief introduction to the professional anti-skid methods of ceramic tiles and the anti-skid treatment steps of ceramic tiles. Let's have a look!

Anti-skid method for tile specialty

1, there is a product called tile anti-slip agent, which is suitable for glazed tiles, monolithic tiles, polished tiles, vitrified tiles, antique tiles, anti-slip tiles, mosaics and other stone floor tiles. Its principle of action is that the anti-slip agent for tiles can effectively penetrate into the pores of tiles and stones, dissolve a small amount of silicon, thicken the original pores, and form many tiny invisible nano-scale dents on the surface.

2. When the ceramic tile meets water, the pores will be filled with water. When the sole or the sole passes through the tile, the water will be squeezed out of the capillary hole under pressure, so that the capillary hole is in a vacuum state, so that the contact with the sole can form the role of a physical sucker. The friction coefficient of ceramic tile is greatly enhanced. It reduces the risk that the floor tiles are easy to slide down after wet water, and has the effect of "convergence when meeting water", making the floor tiles more anti-slip when wet than when dry. It is absolutely safe to walk on it! Even if the surface part is worn later, the existing structural changes inside are stable, so the long-term anti-skid effect can be maintained.

3. The treated floor tile or tile stone also has obvious effect in dry state, and the anti-skid effect is improved several times in water or greasy state, and the once anti-skid effect is lasting.

Anti-skid treatment steps of ceramic tile

1, clean the place and clean the tiles. (Note: If there is wax on the surface of ceramic tile, wax should be removed with wax removal water before cleaning. Apply anti-slip liquid evenly, master the liquid surface thickness and moisturizing time, and moisturize in time if there is dry surface. When you feel resistance after the test.

2. Rinse with clear water. After the anti-skid treatment is completed, dry it naturally for 1-2 hours, and get wet with clear water if necessary, and then use it. Through the chemical reaction with ceramic tiles or ceramic tiles and stone enamel bathtubs, it has super penetrating power, can effectively penetrate into the capillary channels of ceramic tiles and stone enamel bathtubs, widen the channels, form pits on its upper layer, and form physical suction cups when contacting with the soles of feet in case of water or oil pollution.

3. Even if the original internal structure of the tile is partially worn, it will not fall off at any time, and the color of the tile is basically unchanged. After anti-skid treatment, the anti-skid effect is guaranteed for life, and it has strong chemical resistance, weather resistance and ultraviolet resistance. The anti-skid effect is obvious, and the anti-skid effect is improved several times after being greasy in water.

What we have introduced above is the anti-skid method of bathroom tiles and the related problems of anti-skid treatment steps of bathroom tiles. We should know something about these problems. As we know, due to the special environment of the bathroom, we must choose the floor tile with better anti-skid performance. The anti-skid performance of the floor tile we chose is not so good, but there are still some ways to make the floor tile better. I hope our introduction can help you.