Hotel stove rack pot

1, buy a new anti-skid bracket. This method may lead to mismatch or unsightly bracket with the original bracket, but the effect is remarkable.

2. If there is a file or hacksaw at home, grinding the smooth fulcrum of the gas stove bracket rough or sawing out tiny grooves can play a certain anti-slip role, but it destroys the anti-corrosion coating and may accelerate the corrosion of the bracket. Use with caution.

1, what measures should be taken to make a fire with liquefied petroleum gas stoves?

The normal flame of LPG gas stove is light blue, the internal flame is clear, the height is about 20mm, the noise is slight and the firepower is strong. If there is a small flame, the causes and elimination methods are as follows:

1) The fire hole of the burner cover is blocked by dirt, which prevents the mixed gas of the burner from flowing out and cleans the dirt of the fire hole.

2) If the nozzle is blocked, unscrew the nozzle and clean it.

3) The air inlet and nozzle of the pressure regulator are blocked by rust, so that the gas in the bottle cannot flow out. Replace the qualified pressure regulator.

4) If the hose leaks air and ventilation is blocked, please straighten the hose.

5) In addition, attention should also be paid to the reasons such as the gas is about to run out and the valve is not fully opened, and corresponding measures can be taken to solve it.

2. The prosperity of gas stoves is mainly due to the following reasons:

1) Gas Cause: When there is too much moisture or impurities in the combustion gas, the flame will be very bright.

2) Dust reason: When there is dust in the house or when the amount of moisture and oil and gas in the air increases during cooking, it is also prone to prosperity.

3) Cause of air door: This may also happen if the air door is not well adjusted. At this time, only the damper is needed.

4) Causes of the pot holder: The enamel on the surface of the pot holder is red when heated at high temperature, and the flame will be red around the pot holder because of the special material of the enamel, which is the color of metal ions at high temperature.

3. What if the gas stove doesn't catch fire all the time?

If the gas stove can't catch fire all the time, it should be checked according to the following procedures: first, check whether the gas source switch is turned on; If yes, then secondly, check whether the connecting hose is flat or bent; If not, then, finally, pick up the pot rack and see if the ignition nozzle is on fire;

1) If there is no fire, see if the discharge needle discharges. A. If the discharge needle does not discharge, it means that the discharge needle is faulty and should be replaced. B. If the discharge needle discharges, the valve body is faulty, and the valve body should be replaced.

2) In case of fire:

A, if it can burn normally, it means that the igniter position is on the high side, so the user should be instructed to gently press the igniter down a few times, and then put it on the pot rack.

B. If there is a fire, but the flame is too weak to reach the burner, and the gas pressure is too low, the user of the liquefied gas stove suggests that a new pressure reducing valve should be replaced, and the gas and natural gas should be reported to the gas supply company.

C. If there is a fire, the flame can reach the fire cover, but it just won't catch fire, indicating that the valve body is blocked, and instructing the user to dredge the nozzle with fine wire.

reference data

Baidu:/item/%E7% 87% 83% E6% B0% 94% E7% 81%B6/8093092