How to wipe the tablecloth?

(1) grease and protein stains should be removed with alkaline solution. The method is: add 5ml of alkaline solution into 5L of clean water, put it in a tablecloth and boil it for about 5min, then take it out and clean it after the oil stains and protein stains completely disappear.

② Pigment stains can be decolorized with bleach and then cleaned. The method is: add 50g bleaching agent into 5L clean water, soak for 5min, then wash with water, spin dry and air dry.

(3) If individual places are contaminated with oil stains, you can first gently scrub with a toothbrush dipped in detergent, then wipe it clean with a toothbrush dipped in water, and then dry it with a clean cotton cloth. If it is special, you can gently rub the cloth with detergent. Should not be soaked in water for too long, about half an hour. Wash gently, don't rub and wring hard. You can put it in the washing machine to dry. Should be hung in a ventilated place to dry, to avoid long-term exposure to the sun, to prevent fading.

(4) After eating, the tablecloth will get greasy if you are not careful. Try the following methods:

1) First, soak the contaminated part of the tablecloth in hot water at 60℃, take it out for a moment, sprinkle a small amount of alkali powder and the same amount of washing powder, and rub it by hand. Rinse with water, and then wash with washing powder.

2) Chop the soap, wash it with boiling water, and then rub the tablecloth in the soap solution.

3) Take a little flour and mix it into paste with cold water, apply it on the front and back of the oil stain, and dry it in the sun to remove the flour, so as to remove the oil stain.

4) Apply mung bean powder to the oil stain, then iron it with an electric iron for a while to remove the oil stain.