How to install the door sealing strip

The crack of the door is a complicated situation on items such as doors. Once the door is relatively large, it is not easy to be satisfied in daily life. Of course, the crack in the door is a small problem, and it will not be very difficult to solve it. Now the rubber strip under the door is a good object, how to stick it? How to deal with the big crack in the door?

How to stick the adhesive tape under the door?

First of all, we should choose high-quality sealing strips, which are generally sticky and easy to use. Measure the width and length of doors and windows to be sealed with a steel ruler. Cut the sealing strip to the same length as the width of the door and window, and cut it with scissors. Stick the sealing strip on the edge of the door, and stick other places that need to be stuck in turn.

1. Before installing the door and window sealing strip, clean the position where it needs to be pasted, and carefully remove the sundries and dust with a rag to ensure the cleanliness of the pasting position and the tightness between the door and window sealing strip and the notch during installation.

2. Tear the adhesive tape of the door and window sealing strip, aim at the position to be pasted, and paste it gently.

3. When the door and window sealing strips are installed at the interface of both ends, cut the sealing strips again.

4. After the sealing strip is pasted, gently press it by hand to make the sealing strip fit the doors and windows.

What should I do if the door is too big?

1, there is a door seal on the market, which is specially designed for this situation. Can be installed under the door, the distance can be easily adjusted, so that the door can be opened and closed freely, and no gaps can be seen. This door seal is made of plastic and metal.

2. If it is a push-pull wooden door, there are sponge strips on the market, which can be solved by selling them for a few meters.

You can remove the door first, then nail a piece of wood slightly smaller than the crack of the door, and then reinstall the door. You can ask a carpenter to do it.

4. If you have a sliding door at home, you can consider going to the market to buy a few meters of sponge strips and then installing them in the gap of the sliding door, so that all the problems can be solved. In addition, if these two methods still can't solve the problem of too big a crack in the door, then everyone will go to the market and ask a carpenter for help.