How to calculate the area of heat insulation film?

At present, the charging methods of thermal insulation film are divided into automobile thermal insulation film and building thermal insulation film. Since your question refers to the calculation by area, you should want to ask the question of building thermal insulation film.

At present, our building thermal insulation film is generally used for window glass, indoor barrier and top glass of sun room in homes, offices, hotels and other occasions. In this case, we charge by area.

At present, the production specification of thermal insulation film is generally1.52m wide and 30m long. At that time, it was the size of a volume. Therefore, when we want to paste the thermal insulation film, we must first measure the actual size of the glass to be pasted, and then start cutting the thermal insulation film after measuring the actual size. It is time for us to consider the problem in the actual construction process. For example, when sticking a thermal insulation film, we should reserve five centimeters for our hands on the length and width of the thermal insulation film, so as to ensure that our film can be fully combined with the glass after being stuck. Also, after my complete film cutting, if the remaining part is too narrow to meet the requirements of glass area, it will also be regarded as loss.

For example, the remaining thermal insulation film is 5 cm wide, even if it is 30 meters long, there is no suitable glass to paste this size. Because the purpose of sticking the thermal insulation film is to insulate heat, prevent explosion and prevent ultraviolet rays, it is necessary to minimize the splicing of the thermal insulation film, which will always lead to light leakage or too many splicing places, which will also affect the service life and thermal insulation effect of the thermal insulation film, and it is easy to open at the parts that people often rub or touch, and the traces at the splicing places will also greatly affect the appearance. For example, a beautiful coffee shop, but I think it will make the boss and customers uncomfortable, because the glass is covered with splicing lines of heat insulation films.

Therefore, when we paste the thermal insulation film, we usually ask professional construction personnel to measure the glass area and then calculate it. Secondly, they optimize according to the size of the glass and the specifications of the thermal insulation film, and choose the cutting method according to the glass area to achieve the minimum loss and the most reasonable construction effect. This can not only ensure the thermal insulation and aesthetic effect of the thermal insulation film, but also save the cost. In general, the loss of household thermal insulation film is generally 17% of the glass area to which the thermal insulation film is actually attached, unless there are special circumstances.

Customers who want to shoot as much as possible. We all plan according to the glass you want to paste, and we won't say that as long as the glass or the scope involved is free, there are strict procedures and construction procedures. As a big brand of thermal insulation film in China, Master pays attention to our own construction quality and the brand strength of the company. We have many construction cases in Shaanxi, such as xi 'an Radio and Television Center, Xianyang Haiquan Bay, Xi 'an University of Finance and Economics, and Shaanxi.