Traditional Culture Encyclopedia - Hotel reservation - How to ignite the natural gas stove in the hotel?

How to ignite the natural gas stove in the hotel?

1, it is easy to solve by mastering the explosion mechanism. As long as the combustible gas does not reach the explosion limit, it will not explode. Generally, a veil or paper ball is used, which is still put into the furnace after ignition, and then the air valve is opened. When the temperature rises to the redness of the furnace, the fan can be turned on for normal use.

2. It may be that the ignition electronic equipment is broken. Just buy a new electronic and replace it at the place where the gas stove is sold. You can see the gas stove by turning it over (it is fixed with a small screw near the ignition knob). It was held down by a flat iron bar with a little fire line. Be careful not to drop the spring when folding it.

3. Use a special igniter, similar to the electronic principle in electronic lighters, which is available in the market. You can go and have a look.

Extended data:

1. Because the power battery of the igniter is installed in the casing, it is better to install the battery first and then in the cooker. When changing the battery, just open the back cover.

2. Because of the high output voltage of the igniter, when touching the button, the hand can't touch the discharge needle to avoid elegant electrical contact with the human body. If unfortunately encountered, there will be no danger to life.

3. The relative distance between the discharge ignition needle and the burner hole should be appropriate and firm. If it is loose, it should be adjusted in time to ensure its ignition success rate.

4, discharge ignition needle is generally not easy to break, if not discharge, it may be that the battery is dead, or the pulse igniter is faulty, not necessarily the ignition needle. If a new battery is replaced, it is recommended to find a manufacturer for after-sales inspection.