Traditional Culture Encyclopedia - Hotel reservation - How to use two pools on the inkstone

How to use two pools on the inkstone

It is also called inkstone sea, inkstone flood, inkstone swamp, or Mo Chi, Mohai, etc. Refers to the low-lying part of an inkstone, which is used to store water or ink. It can be large or small, depending on the material. Some circular inkstones are designed on the edge of inkstones, while others have no inkstones at all. However, the top-grade inkstone made of precious stones usually digs a small area as an inkstone pool, because inkstone is an important feature of inkstone after all.

Correct usage of inkstone:

1. Water storage at ordinary times: inkstone also needs to be moistened, and it needs to be stored with clear water every day at ordinary times. The inkstone cannot be short of water. It used to be called "nourishing research".

2. Change water when using: Drop water on the surface of the inkstone with a small pot, and then grind it with the inkstone. Pay attention to hot water damage and ink damage.

3. Brush after use: After the inkstone is used up, the remaining ink must be washed off and cannot condense on the inkstone. Otherwise, the residual ink will form a slag block, which will first hinder grinding and then damage the surface of the pen and ink. If mixed with new ink, there is no advantage of inking or inking.

When washing, you can use loofah and other things to assist, but you can't use hard objects to rub hard, so as not to hurt the smooth surface of the inkstone. If you need to take it out, it's best to dry it in the shade, and don't wipe it with paper, so as not to leave debris mixed with ink.

4. The new ink is polished lightly: the new ink is angular. If the ink surface is easily damaged by hard grinding, it can be lightly ground when used.

5. Ink discharge: Take out the ink after grinding, and don't put it into bubbles, otherwise it will be difficult for the ink to stick to the paste and damage the ink surface.

If you accidentally stick it, you can first wet it with water, rotate the ink in its original place, and then take it out after the ink is loose.