How to Clean Stubborn Stains on Bathtub —— Introduction of Removal Techniques

Nobody likes to take a bath in a dirty bathtub. Frequent contact with moisture, bacteria and mold will gather on the bathtub wall, causing ugly and unsanitary chaos. Trying to keep the bathtub clean is the best way to prevent dirt and sticky substances from getting out of control, but sometimes you have to take out a big gun to remove heavy and fixed stains. Fortunately, this can usually be done with the help of some basic household products and a little effort.

First, remove the stains on the acrylic bathtub.

1. Avoid using abrasive chemical cleaners. When cleaning acrylic bathtub, please stay away from irritating astringent powder such as comet and Ajax, and irritating chemicals such as bleach. Acrylic is a soft material, so it is easy to be damaged. These types of products will almost certainly damage the surface of the bathtub.

Usually, it's best to start with the mildest cleaning solution. If this doesn't work, you can gradually choose more powerful options.

2. Spray stains with vinegar. Distilled white vinegar is an excellent natural cleaning solution, especially on smooth surfaces such as acrylic acid which are easy to remove stains. Fill a spray bottle with vinegar and keep it at hand for daily bathroom cleaning. Cover the affected area completely with plenty of vinegar.

If you happen to put some lemon juice in the refrigerator, it is a good substitute for vinegar.

3. Let the vinegar stand 10-20 minutes. When it is left standing, the acidic substances in vinegar will decompose mold, dirt and discoloration, so it can be easily wiped off. Before you start scrubbing, you can even see the stains begin to dissolve and run away by themselves.

Make sure to give vinegar enough time to start working.

Especially troublesome place, sprinkle a little baking soda when soaking vinegar.

4. Wipe the stain with a soft sponge. The yellow surface of ordinary dishwashing sponge will do. After soaking in vinegar, dirt and dirt should be easily removed. Use a quick back and forth scrubbing action to continue to treat stains until they disappear.

5. Clean the inside of the bathtub. Let the tap run for a few minutes to wash away the last trace of dissolved dirt and dirty vinegar. If you are cleaning the bathtub with an adjustable shower head, turn on the shower head and let the water flow to the place you just cleaned. After cleaning, the bathtub needs to be kept dry to avoid the return of bacteria that cause stains.

Most bathtub stains are the result of film residue caused by bacterial accumulation.

Close the shower curtain and turn on the ceiling fan, so that the bathtub can get a stable airflow.

Second, remove the stains on the enamel bathtub.

1. Try cleaning with vinegar first. Although vinegar is a mild natural cleaner, it is usually enough to treat most stains when used in large quantities and given time. Spray the bathtub thoroughly, let the vinegar stand for a few minutes, and then wipe off the stains with a sponge or a stiff brush. If it is found that vinegar does not achieve the expected effect, you can continue to use more intensive methods.

When simply adding more and more vinegar is not enough, there will be a little.

2. Use commercial cleaning spray without bleach. Since most of these products contain similar combinations of ingredients, any one of them can be as effective as the other. Just make sure that any product you choose does not contain bleach, because this will seriously weaken the outer enamel layer of the bathtub.

Buy only cleaners approved for enamel bathroom surfaces. Before buying a specific cleaning product, be sure to check the label carefully, so that you will know that you have got what you need.

If possible, please open the window and door nearby, turn on the fan to ventilate the bathroom, and use these products for cleaning.

3. Make your own natural cleaner. If you don't want to go shopping, you can make a simple multifunctional bathroom cleaner at home and mix warm water, baking soda, castilla soap and essential oil in a spray bottle. All these ingredients are easy to obtain and safe to use, but they are very effective when combined. Once they are mixed together, spray the mixture on the dyed surface and make it take effect within a few minutes, then wipe it off.

If you have problems in finding castilla soap, hydrogen peroxide will be an acceptable substitute.

Essential oils such as tea tree and mint can also be used as natural disinfectants.

4. Soak the problem area for a few minutes. Atomize the solution and give it a chance to sit down. Pay special attention to places where dyeing and discoloration are serious. This cleaner should dissolve these stains immediately.

The longer the solution is allowed to stand, the more effectively it can lift the residue that has been precipitated for a long time.

Please wear gloves and work in a well-ventilated place when handling chemical cleaning solution.

5. Wipe off the stain gently. Use a soft sponge or microfiber towel to avoid leaving marks or scratches. Check for stains with a gentle circular motion. When finished, rinse off all the residual dirt and cleaning liquid and let the bathtub dry completely.

Spray the cleaning solution again if necessary. Wipe and repeat until the stain falls off the enamel coating.

Scrubbing enamel with something rougher than a sponge may wear the paint surface.

Third, remove the stains on the ceramic bathtub.

1, pick up a can of grinding cleaning powder. Thick deposits on the surface of porcelain, you need to use more durable ones. Small particles can penetrate deep into the stains on the bathtub surface and remove them.

Powder detergent contains chemicals called surfactants, which have mild grinding performance. This enables them to deal with hardened and adhered residues more effectively.

Use a small amount of grinding cleaner. For most jobs, a jar is enough to be thoroughly cleaned.

2. Insist on using natural substitutes. Alternatively, a mixture of hydrogen peroxide and tartar can be used to treat stubborn stains, such as rust and hard water residues. Mix the two ingredients together until their consistency is roughly the same as that of the cake icing, and then apply them directly to the stain. /kloc-After 0/0 minutes, wipe off the stain with a nylon brush or pumice until it is completely wiped off.

For those who are worried about the health and environmental impact of chemical cleaning products, homemade mixtures such as hydrogen peroxide and tartar cream will be the first choice.

Hydrogen peroxide also helps to treat age-related discoloration and reduce the smoothness of the bathtub.

3. Sprinkle cleaning powder around the dyed bathtub. Moderate dust removal should be enough to deal with most chaos. Powder itself will not stick to the surface of porcelain, but it will form a paste when mixed with liquid, which can be directly applied to stains.

Be sure to cover the bottom of the bathtub. The accumulated mold may be in danger of slipping.

4. Add enough water to make a paste. Spray purified water or ordinary tap water on the cleaning powder. With the increase of moisture, the powder will show a thick foam consistency. Rub this ointment on the stain and it will take effect in about half an hour.

You can also wet a clean sponge or towel and rub it in detergent until it thickens.

Another option is to wet the bathtub before using the detergent. Spray a bathtub or a cup filled with water with a shower nozzle and pour it into the bathtub.

Be careful not to add too much water. If it is too thin, the detergent will not be so effective.

5. Scrub the stain with a solid scrubber. Because the surface of porcelain is hard and durable, you can safely scrub it with a grinding tool without worrying about scratching. For best results, please use pumice or a hard brush. Treat the stains until they are completely removed, then rinse the bathtub with clean water and dry it before use.

If you don't have a special brush, you can use the rough green side of the kitchen sponge.

Never use steel wool or any similar material to scrub the porcelain basin. Even if the porcelain is scratch-proof, it is enough to cause permanent damage to the veneer.