Graduation design task book

Graduation design task book 8 articles

Graduation design task book of petrochemical technology and engineering department 1 graduation design task book

Design topic: process design of heat transfer mode and related equipment design in chemical production

Design contents, objectives and requirements

Design objectives:

According to the working practice or chemical production practice, the typical process fluid in a certain link is selected, and the process flow design and typical equipment selection are carried out for its heat exchange mode. Through graduation design, I am familiar with the selection principle of fluid heat exchange mode in chemical production, the design and selection of heat exchanger, evaporator and heating furnace and the key points of operation.

Design content:

1. Master the basic requirements and main contents of the design of process fluid heat exchange mode in chemical production, and master the design principles.

2. Demonstrate the design scheme, determine the design flow and method, and master the material balance and heat balance in the chemical process, as well as the design principles, methods, operation and maintenance points of the main process equipment (heat exchanger, evaporator, heating furnace, etc.). ).

3. Basically master the determination method and control scheme of material parameters (such as temperature, pressure, flow rate, etc.). ) technology and equipment.

4. Requirements and standards for drawing material flow chart, process flow chart with control points and main equipment diagram.

Design requirements:

1. According to the content of graduation design (thesis) task book, conduct research in groups, consult Chinese and foreign materials, implement the research content, formulate research methods, steps and measures, and write an opening report with no less than 1500 Chinese characters.

2. Report the progress of graduation design (thesis) to the instructor in time.

3. The writing of graduation design (thesis) should conform to the requirements of "Writing Specification for Graduation Design (Thesis) of Hunan Petrochemical Vocational and Technical College". The number of words in the paper should be more than 15000 words.

4. All graduation design contents must be uploaded to the personal space of the World University City as required, and each group leader is responsible for the inspection and supervision of the personal space of the group.

References:

[1] Fluid transport and heat transfer, edited by Li XX

[2] "Chemical Unit Operation Technology" edited by Wang XX

[3] Handbook of Chemical Process Design (3rd Edition) (Volume I and Volume II), Chemical Industry Press, 20xx.08

[4] Handbook of Chemical Engineering (2nd Edition) (Volume I and Volume II), edited by XX et al., Chemical Industry Press, 1998.6438+065438.

[5] Fundamentals of Chemical Equipment and Machinery, edited by Dong XX, Chemical Industry Press, 20xx.0 1

[6] Chemical Data Guidance, edited by Wang XX, Chemical Press, 1995.438+00.

[7] Chemical Engineering Drawing, edited by Wei XX, Chemical Industry Press 1994.05.

Graduation design task book 2 I. Basic tasks and requirements

1. Write the opening report within the specified time;

2. Collect the first-hand information of internship enterprises and internship positions, and sort out the information;

3. Complete the first draft of graduation design instruction within the specified time, and actively communicate with the instructor;

4. According to the revision opinions given by the tutor, further improve the graduation design manual and strive to finalize it as soon as possible;

5. Make a presentation ppt for defense and prepare for defense.

Second, the work content and schedule

1. Title: xx.12.15—xx.12.30.

2. Write the opening report: xx.1.1-xx.1.18.

3. Data collection and design implementation: XX.1.19—XX.2.20.

4. Complete the first draft of the design specification: xx.2.21—— xx.3.20.

5. Complete the revised draft of design specification: xx.3.21—— xx.4.20..

6. Specification: xx.4.21—xx.5.4 xx.5.4.

7. defense: XX.5.9

Three. Relevant materials to be provided for defense.

1. There are 2 graduation projects and the opening report of the thesis 1;

2. Make a presentation ppt；;

3. At least 16 internship week records, internship summaries, photos of internship sites, graduation design works, opening reports, internship appraisal and graduation design task books should be published in the university town space.

Graduation design "Clinical Case Nursing Plan" task book

Topic: Nursing care of patients with acute intestinal obstruction

Design contents and requirements:

Content outline

1, summary and analysis 1 Nursing care of patients with acute intestinal obstruction whose condition is critical and complicated and difficult to treat and nurse. According to the main clinical manifestations of patients such as abdominal pain, vomiting, abdominal distension, constipation and poor exhaust, corresponding nursing measures were taken to prevent various complications.

2. It has important influence and significance on promoting disease improvement, correcting systemic physiological dysfunction, relieving obstruction in time, actively preventing complications and improving patients' quality of life.

3. Learn to teach teachers solid theoretical knowledge, dedication and keen observation, strictly abide by the principles of "three checks and eight pairs" and "sterility", discover and deal with various existing or potential nursing problems in time, and train clinical nursing ability.

Graduation design task book 3 summarizes that there are many places to be improved in doing this undergraduate graduation task book. It's the first time I've come into contact with this kind of work, which is a bit strange. I don't know where to start, and I'm a little overwhelmed. I need to work harder. Compared with the task book revised by the teacher, many problems were found. So, make a summary here to avoid repeating the same mistakes in the future! ! !

Undergraduate students have already started the topic twice, and some undergraduates already know how to start their finished products, but as a graduate student, I am still a little confused sometimes. In fact, carefully compare the task book made by the teacher and me. When the teacher opens a topic for undergraduates, the emphasis is on the task book, but I didn't write it in, so I can't understand the teacher's intention well. For example, Liu xx's Safety Criticality of Production Process Events has a background introduction at the beginning. I am a part of the paper written by Sister Wang xx: "With the rapid development of global economy and technology, products are large-scale, complicated and widely used. And with the improvement of people's living standards, product safety has been paid more and more attention. It has become a more important topic to effectively improve the safety of the whole product by improving the safety of some products. " Although I made a modification, it is completely wrong, because this is not the background of safety criticality of production process events. It is the background of product safety criticality and the concept of stealing. The appearance has changed, but the essence has not changed. To this end, I am also regarded as a model of carelessness by teachers. And was severely reprimanded by the teacher. This is a big blow to me, and depression is inevitable. But I should be persuaded because I did something wrong. The teacher changed it: "An accident is a series of events that point to unexpected consequences. However, the events in the event chain have different effects on the accident and its consequences. Therefore, it is very important to find people with great influence and take corresponding measures for accident prevention and control. " In fact, the teacher has pointed out the important content for the first time, but I didn't understand it. This shows how stupid I am.

There is also Wang xx's Safety Risk Assessment of Xinchengzi Chemical Industry Park. Under the premise of understanding the teacher's explanation and thinking about the information carefully, I still can't meet the teacher's requirements as I wish. For example, I wrote: "There is no possibility of toxic gas leakage in the existing enterprises in Xinchengzi Chemical Industry Park, but a fire may ignite substances that release toxic gases, which may lead to personnel poisoning. Therefore, it is also necessary to consider the application of Norwegian dnv software and the safety relevance between enterprises, determine the scope and severity of the accident, and put forward rectification opinions. " . However, the teacher changed to "focus on major events such as fire, explosion and secondary poisoning accidents and their impacts, comprehensively apply relevant theories and technologies including the risk assessment software of Norwegian Register of Shipping, and consider the safety relevance among enterprises to conduct safety risk assessment of the park, determine the scope and severity of the accident and the acceptability of the risk, and put forward corresponding rectification opinions." I think it is easy to find my ignorance and shallowness by careful comparison. The teacher simply wrote out the types of accidents in Xinchengzi Chemical Industry Park: fire and explosion. There is no poisoning accident, but it is possible that people may be poisoned and die because of the burning of toxic substances and the release of toxic gases caused by fires and explosions. That is, the impact of the secondary poisoning accident. In terms of application method and technology, I directly restrict the application of Norwegian dnv software, considering the security correlation between enterprises, that is to say, only Norwegian dnv software can be used, and other risk assessment software cannot be used. How arbitrary. It can be seen that the logic of language is inaccurate.

After careful reflection and summing up lessons, I found several problems. Why am I criticized by the teacher and other students with the same conditions are not? Why have I written down the teacher's key points in my notes, but they can't be reflected in the task book? Why can't I express the same meaning properly? Am I not serious enough? Bad attitude? Impetuous? I don't think so, because I still know how much I value when I write the task book. There is something wrong with logical thinking. When reading relevant materials, my thinking is fixed on their thinking. Just like a template, I have to follow the template, and there is no big way out. However, each individual is different. It is impossible to pass the exam without grasping your personality. If you can think hard, change your fixed logical thinking, find out your personality and highlight the key points, you will be qualified. After this lesson, I will be a wake-up call in the future!

Graduation design task book 4 main contents:

According to the basic theories and methods of e-commerce, combining the characteristics of e-commerce development in today's society and the development direction of internationalization and networking of e-commerce is the research direction of this paper.

Basic requirements: the paper format is correct and meets the requirements; 6. Submit papers and related materials in time.

Main reference materials:

Introduction to e-commerce, e-commerce network marketing, marketing, e-commerce laws and regulations, e-commerce network construction, economics foundation, e-commerce case analysis, business weekly, Internet, etc.

Completion period: 20xx April 1.

Instructor's signature:

Signature of the person in charge of the review team:

20xx April 1

Graduation Design (Thesis) Opening Report Form

Research on e-commerce network marketing strategy of small and medium-sized enterprises

Instructor Meng Gang

Name of student: Zhang Haifeng Student ID 2007060 15 E-commerce major.

First, the topic source:

Choose your own topic according to the scope given by the instructor.

Second, the design purpose:

As a new business model and enterprise management mode, e-commerce plays a very important role in expanding business, improving competitiveness, improving supply chain and cultivating new economic growth points. However, as far as the application of e-commerce in small and medium-sized enterprises is concerned, there are still some problems such as insufficient understanding of e-commerce, backward facilities, ineffective implementation, lack of planning and insufficient globalization. This paper will discuss and study this.

Third, the design ideas:

According to the above purposes, this paper first analyzes the present situation and characteristics of the e-commerce model of small and medium-sized enterprises, and divides the e-commerce model into online stores/services, online brokers and value chain service providers. Secondly, the above-mentioned e-commerce models are analyzed and compared from three dimensions: horizontal value chain, vertical value chain and information content. Finally, the shortcomings of the current e-commerce model of small and medium-sized enterprises are put forward, and the development trend of e-commerce model is discussed and studied by introducing knowledge value chain on the basis of analyzing the development mechanism of value chain.

Four. Phase content and progress of task completion:

The second stage: 20xx165438+10.21-kloc-0/65438+10.30, write the opening report, submit it and check it by the tutor. The fourth stage: 20xx65438+1October/-June 65438+1October 20th, communicate with the tutor and revise the thesis.

Stage 5: Finalize and submit the formal graduation design results before April 20xx 1 year.

Graduation design task book 5 I. Design topics:

Landscape Design of Xiashankou Hot Spring Resort Hotel in Dali

Second, the teaching purpose

1. Combined with the experience of professional courses study and graduation research practice in recent years, the theoretical knowledge, technical specifications and expression techniques are integrated with specific environmental art design, and the procedures and methods of architectural environmental art design are fully mastered.

2, starting from the overall environment, from the whole to the local design. From the outside to the inside, we should first deal with the relationship between the landscape environment and the external shape of the building, and at the same time consider the functional problems that the building should meet. Then, the landscape should be handled well, and many aspects should be considered in the design, such as dealing with spatial relations, satisfying functions and beautifying the environment. Handle the dialectical relationship between function and form, technology and art, appearance and connotation, the flavor of the times and local ethnic characteristics. Finally, from the perspective of engineering design, comprehensively consider the relationship between landscape and architecture, art and structure, and draw landscape design drawings and renderings in strict accordance with the requirements of technical specifications and standards.

3. In the design process, we should extensively absorb the experience and lessons of environmental art design examples at home and abroad, learn the methods of data inquiry and collection, on-site investigation and analysis, carefully conceive and create, improve the quality of graduation design, and strive for the best social, economic and environmental benefits of the project.

Third, the design content requirements

It is necessary to coordinate and unify with the thoughts of planners and operators, so as to achieve the unity of situation and function. The concepts of natural landscape and artificial creation are coordinated and unified. Highlight the unity of cultural atmosphere and service process of water culture.

Design scope:

① entrance landscape design

② entrance architectural design

(3) The public part of the bubble pool area:

Landscape of foam pool area

Theme bubble pool design (including bubble pool form, materials, supporting facilities and decoration design)

Landscape of lobby entrance area

Architecture and landscape of boutique spa area

Theme cultural landscape and riverside landscape design on both sides of the main road

It involves the design of landscape architecture (bridges, corridors, pavilions, pavilions, etc.). )

Landscape structure design (landscape wall, sculpture, etc. )

Architectural design of geothermal residence

Waterscape and Fountain Design

Vertical design

Lighting design

Factory configuration design

Paving design

Logistics part: office, staff lounge and bathroom.

Water bar (service room)

facility house

Logo design of supporting facilities (courtyard lights, sanitary facilities, service settings, etc.). ) of the foam pool.

Fourth, the design requirements

1, multimedia electronic file (ppt format, used for defense)

(1), design overview;

② Design orientation and starting point;

③ Design concept;

④ Main technical and economic indicators;

(5), a full set of thumbnails

⑥ Summary and experience

⑦, thank you

8. philology

2. Design text-description is not less than 1000 words (A3 printed and bound, kept for record).

1. cover;

②. Catalogue

③ Chinese and English keywords and Chinese and English abstracts.

④ Design description text (including design overview, design concept, design process description and related technical indicators)

(5) A full set of A3 thumbnails and a full set of drawings shall include:

1 color general layout

2. Bird's-eye renderings

3. Landscape analysis map

4. Traffic planning map

5. Landscape functional zoning map

6 scenic spots and bubble pool layout and tour organization plan

7. Vertical planning figure 8. Lighting zoning map

9. Can express the key landscape hand-painted or computer renderings of the scheme.

10. Node hand-drawn color map

1 1. Reference diagram of node effect

12. List of nursery stock configuration and selection of large and medium-sized tree species

13. Landscape outline

14. Reference to the proposal of key papers

15. Reference intention of decoration material proposal

16. Reference intention of the proposed lighting scheme

17. Suggestions for supporting facilities (including tables and chairs, trash cans and flower stands).

⑥ Summary and experience

⑦, thank you

8. philology

3. Design documents CD (archive)

(1) cad files: building plan, plan, top plan, elevation, section (at least one for each space) and detailed drawings.

② Two exhibition boards (900mm times 1200mm).

③ A complete set of documents printed in A3 text.

(4), architectural appearance and perspective performance of each space (including three-dimensional model)

Verb (abbreviation for verb) design schedule

The first week to the fourth week (3.1-3.28): graduation project research and practice.

The fifth week (3.29—4.4): Organize the internship research report and get familiar with the graduation design topic and task book.

Weeks 6 and 7 (4.5-4. 18): the first stage, design conception, theme determination, zoning, general plan, etc. Including color general layout, bird's eye view effect, landscape analysis, traffic planning, landscape function zoning, scenic spots and bubble pool layout and tour organization planning.

Week 8 and Week 9 (4. 19—5.2): In the second stage, the design of each node is divided into zones, including the entrance area of the lobby, the architecture and landscape of the boutique spa area, the theme cultural landscape on both sides of the main avenue, the riverside landscape design and the architectural design involving landscape (bridges, corridors, pavilions, pavilions, etc.). ) and landscape structure design (landscape wall, sculpture, etc. ).

No.10-1week (5.3-5. 16): in the third stage, select the nursery stock configuration and the selection list of large and medium-sized trees, landscape section map, reference scheme of key sketches, reference scheme of decorative materials, reference scheme of lamps and supporting facilities (including tables, chairs and garbage bins)

Week 12 to 15 (5. 17…6. 13): the fourth stage (computer drawing or tool hand drawing, and binding) arranges all design documents, supplements the required reference materials, and completes the design text.

Week 16 (6. 14…6.20): graduation defense and graduation design exhibition.

Philology of intransitive verbs

1. French architectural style: Li Jie; China Bookstore Publishing House

2. The Complete Works of Liang Sicheng Volume 7: Liang Sicheng; China Building Industry Press

3. "tang style Architecture": Li Baijin; China Building Industry Press

4. A brief history of Nanzhao: Gu Yuejuan; yunnan university press

5. The Legend and Society of Miao Township: Lian Ruizhi: Life Reading and New Knowledge Sanlian Bookstore

6. Planning and planning of hot spring development: building a hot spring world for tourism and leisure: Wang Yanping and Jesson Wang; Dongbei University of Finance and Economics Press Co., Ltd. May 2009

7. Hotel design, planning and development: Walter A. Lutz Richard H. Penner Lawrence Adams; Liaoning Science and Technology Press, September 2002.

8. Hotel and Hotel Design: Wang Yi; Water Resources and Hydropower Press, June 5-38, 2006+10.

9. Handbook of Landscape Architecture, Site Planning and Design, 4th Edition: Symonds Stark; China Building Industry Press, June 5, 2009 to1October 38.

10. Land of Humanity: Marcus China Building Industry Press, Claire Cooper 2; 00 1 year1month

1 1. natural design: Macharg Tianjin university press, June 5438+10.

Graduation Design Task Book 6 Purpose: According to the current file management requirements of Shaoguan Radio and TV University, establish file computer management. Through the design of a practical system, developers can use their professional theoretical knowledge to solve practical application problems.

Task:

First, the specific requirements of the document management system are as follows:

(1), file input

According to the characteristics of the file, you can enter the directory in the volume and the directory of the file, save it in the database, and wait for the supervisor to sign and review it.

(2), modify the data

Users have the right to modify unapproved input data. Once the approved data is read-only, it cannot be modified.

(3), query statistics

You can query by fields or set conditions, such as file number, title, responsibility, date, etc. Make statistics on related fields, such as counting the number of directory records in the volume and the number of directory records in the case file; You can also make statistics according to the number of annual volumes and files.

(4), print reports

Print the preview according to the actual output table, including the directory in the volume and the file directory output according to the standard format.

(5), system maintenance

System maintenance should include user password modification, user registration form and data backup.

By changing the password, users can change their own passwords. The user usage registration form is used to record the date and usage time of users entering the system, and only the supervisor can consult it. Data backup is used to back up each library table.

(VI) Other requirements

① The user name and password of the system should be reflected in the data dictionary.

② Beautiful interface and convenient operation are required. It is necessary to provide online help information.

Second, the database table structure design and requirements

1, list structure enumeration

(1), file table:

Serial number, C, 3 document number, C, 15 title, C, 70 start and end date, page D, C, 3.

Storage period, c, 10 review, l remarks, m, 4

(2), volume table:

Serial number, C, 10 document number, C, 15 document number, C, 14 person in charge, C, 26 title, 70 date, D approval, L page number, C3 remarks, M, 4.

(3) Use the registration form:

Number, n, 10 name, c, 10 use date and time, time and date type.

(4), user password table:

Work number, C, 2 digits, C, 8 digits, C, 6 password, N, 6

2, the establishment of data dictionary, given in tabular form:

Graduation design progress requirements

1, in the preparation stage (before the end of February), determine the topic, collect relevant materials and prepare reference materials.

2. Systematically analyze and determine the implementation plan (March 1 to March 10). Through the demonstration and analysis of the subject, the adopted technology is compared with the adopted scheme, and a better scheme is selected from a variety of possible schemes.

3. In the stage of programming, calculation and experimental analysis (March 1 1 April 10), according to the design requirements, the design principles and calculation methods are determined by using newer theoretical knowledge, and the standardized program flow chart, source program, program debugging and case analysis are compiled to fully meet the design requirements.

4. At the stage of writing graduation design instructions (April11~ April 30th), write standard graduation design instructions with reference to the writing outline.

5. Preparation for defense (May1~ May 10)

6. Graduation design defense stage (May11~ May 20th)

Students who participate in the graduation project meet once a week, and the tutor will give guidance or answer questions.

reference data

1, Database Foundation and Application, edited by Wang Li, Central Radio and TV University Press.

2. VISUAL FOXPRO 6 .0 practical tutorial edited by Zhou Yimin and other science publishing houses.

3, Shaoguan Radio and TV University archives comprehensive management regulations and management measures Shaoguan Radio and TV University Office.

4. Other relevant information

Appendix 1 Writing Guide for Graduation Design Thesis

Appendix II Writing Outline of Graduation Design

Graduation Design Task Book 7 Student Name: Gao xx Student ID: 0930 19xxxx

School: xx College of xx University of Technology Major: Computerized Accounting

Task start and end time: MM DD YY to MM DD YY.

Graduation design (thesis) topic:

Comparative analysis of financial management objectives of modern enterprises

Graduation design work content:

The first chapter is introduction.

1. 1 financial management target background of modern enterprises

1.2 Research Status of Financial Management Objectives of Modern Enterprises

1.3 the significance of studying the financial management objectives of modern enterprises

The second chapter, the goal of modern enterprises and its requirements for financial management.

2. 1 Survival and its requirements for financial management

2.2 Development and its requirements for financial management

2.3 Profit and its requirements for financial management

Chapter III: Comparative analysis of the main financial management objectives of modern enterprises.

3. 1 profit maximization

3.2 Maximizing earnings per share

3.3 Maximizing shareholders' wealth

3.4 Maximizing enterprise value

Chapter four, the choice of financial management objectives of modern enterprises.

4. 1 Maximizing enterprise value has richer connotations.

4.2 guide financial management personnel to implement financial management behavior

4.3 Maximizing enterprise value will have a fundamental impact on the whole financial management theory system.

Chapter five, conclusion.

Information:

[1] su xx. Financial management [m]. Jiangsu: Journal of Yuxi Teachers College, XX.

[2] An X. Analysis of enterprise financial management objectives [m]. Cooperative economy and technology.

[3] Ma xx. Financial management [m]. Tsinghua University publishing house, XX.

[4] Joe xx. Special study on financial management [m]. Beijing: China Financial and Economic Publishing House, XX.

[5] Li xx. Comparison of financial management objectives of enterprises [j]. Hebei: Hebei People's Publishing House, XX.

[6] Wang xx, Guo xx: Financial Management, Higher Education Press, XX Edition.

[7] ten thousand xx. Profit maximization is the reasonable choice of enterprise financial management objectives [j].XX

Instructor's opinion:

Signature:

date month year

Dean's opinion:

Signature:

date month year

The background and significance of the topic selection of graduation design task book 8;

Since the beginning of this year, due to the changes in the pattern of insurance industry, the adjustment of insurance business structure, the entry of foreign insurance companies after China's entry into WTO and the serious impact of SARS, the insurance industry was once in a "cold ice" state. Although the climate of the insurance industry turned "cloudy to sunny" after sars, the recovery of the industry is still not obvious.

Under this premise, insurance companies can only strengthen and deepen their services, maintain old customers and develop new customers by consolidating their original customers and further enhancing their corporate image. At present, it is inevitable, timely and necessary for many insurance companies to carry out customer service festivals.

With the continuous development of insurance business, the society has a deep understanding and recognition of some development history, business fields and service traditions of insurance companies, which makes the popularity and sales performance of enterprises rise continuously. In order to better expand the publicity field, increase the development of insurance business, establish the authoritative position of enterprises in the insurance industry, and better serve customers, the planning scheme of customer service festival is specially formulated.

Design objectives:

Only by consolidating existing customers and further enhancing corporate image can insurance companies strengthen and deepen their services, maintain old customers and develop new customers, and can they develop.

Problems to be solved in design:

1. Design the questionnaire.

2, in-depth market research, understand the current situation of customer service of an insurance company, and analyze its existing problems or deficiencies.

2. Design the corresponding customer service management or optimization scheme.

3. Demonstrate the design scheme.

The main contents of the design:

1, summary

2. Keywords

3. Background and significance of the research.

4. Insurance customer service theory.

5. The present situation and analysis of customer service management in insurance companies.

6, insurance company customer service management improvement measures.

7. Conclusion

8. thank you

9. Reference

Design results:

In order to better expand the field of publicity, increase the development of insurance business, establish the authoritative position of enterprises in the insurance industry, and also serve customers better and better.