How to design the bathroom layout of hotel rooms

Tianjin Shouchuang Decoration reminds you that the bathroom is a convenient place for people, but the bathroom in the hotel has more functions and significance. The bathroom in the hotel room is one of the most important features to reflect the overall hardware level of the hotel, and it is required to meet the functional requirements. Strive for pattern innovation. Spatial changes, rich vision. And professional standards for lighting efficiency. The specific requirements are as follows:

1. The position of the toilet can break the routine and avoid the direction facing the door. Adopt concealed design, set up an independent small space, with an internal clear width of 85CM and a clear height of 120CM (preferably 140CM), and open the door separately to reserve lighting. (This is difficult to achieve in the traditional mode)

2. Set the basin in the small lobby of the bathroom, with wet and dry areas.

The bathroom doesn't have to be separated from the bedroom by a wall. A single bathroom can communicate with the bedroom, or a curtain with a glass partition can be added to increase the communication between the bathroom and the bedroom. Some bathrooms use separate jacuzzis with deep grooves and no sprinklers. You can communicate with the dormitory completely.

5. Five-star hotels should install an emergency call button at least 70cm below the side wall of the bathtub. Or a pull cord type calling device.

6. Of course, the bathrooms of modern hotels, especially high-end luxury hotels, should not only meet the requirements of function and comfort, but also have cultural taste. Designers can put some handicrafts on the sink or beside the bathtub. At the same time, it provides professional directional lighting for those handicrafts.

7. Many hotel bathroom ceilings use waterproof gypsum boards, but they are not. We suggest using aluminum plate or other metal materials with rust-proof and waterproof surface, but don't use 600×600 or 300×300 dark keel aluminum plate ceiling, because it will be deformed due to manual disassembly and assembly during equipment maintenance;

8. Waterproof slate is set on the ground under the bathroom door to prevent the water in the bathroom from flowing into the room passage;

9. Select the silent harness with high pumping force. Don't choose too complicated shower facilities, choose equipment that is commonly used by guests and easy to operate.

10. In the bathroom with shower glass room, you must choose safety glass. It is best to have adhesive tape next to the glass door, which is waterproof and can make the glass door more soft and comfortable when it is opened;

1 1. Don't use a hand-held faucet with too much water impulse. Choose a faucet with soft and wide water outlet. Sometimes the water flow is too strong, which will splash on the pants of the guests, causing temporary inconvenience and unhappiness.

12. The mirror should be fog-proof, and the mirror surface should be large, because the bathroom is generally small, and the space is relatively spacious both visually and psychologically because of mirror reflection. Clever use of mirrors in the bathroom will have unexpected effects;

13. The floor tiles in the bathroom should be skid-proof and dirt-resistant. The edges of floor tiles and wall tiles are finally marked with white or other colors of waterproof glue, so that dirt has nowhere to hide;

14. The telephone in the bathroom should be placed between the toilet and the sink to avoid water from the quilt;

15. The mirror headlights should have anti-glare devices, and the downlight in the middle of the ceiling is best covered with frosted glass;

16. The door and door cover of the bathroom should be waterproof at a distance of about 200 from the ground, and can be designed as stone or sand steel veneer;

17. The floor of the shower room should be non-slip, and you can also choose a bathtub with non-slip design, and you must also be equipped with anti-slip mats.