What does sign production want?

The functionality of the sign system can achieve the recognition effect of "silence is better than sound", and the aesthetics of the sign system makes its final visual effect coordinate with its humanistic environment. High-quality identification marks can assist the identification system to enhance the culture of the whole enterprise, hospital, school, scenic spot and hotel. So how can we make high-quality signs? Cangnan Goldman Sachs Sign Craft Factory put forward several requirements for sign production craft, in order to help sign enterprises improve their production technology level and help enterprises that need to make signs to distinguish the pros and cons of signs. Requirements of aluminum alloy profiles: aluminum alloy profiles and commonly used plastic material accessories should meet the quality requirements of aluminum alloy label profiles. The angle and bottom deviation of aluminum alloy profile is less than the positive and negative deviation of 65438 0 degrees.

Plane clearance ≤0.4%*B(B is contour width). Processing requirements of acrylic signboard: Acrylic is hot bent out of the mold, with the same size and shape, and no bubbles and scratches on the surface. After hot bending, the surface is treated with coarse sand and fine sand and polished to ensure its smooth surface without steps. After finishing, the surface gloss is soft and uniform, without particles, bubbles and even light transmission. Stainless steel process requirements: stainless steel plate must be bent. Stainless steel plate must be hollowed out before bending to ensure the straightness of the edge; Make sure that the arc angle of the bend is r < 1 mm. Before welding, remove the oil stain on the surface to reduce the defects such as virtual welding, porosity and cracks formed in the weld. After welding, all visible welds shall be polished smooth, as smooth as the surrounding surface, without obvious scratches. Technical requirements for baking paint: a series of surface treatments such as cleaning surface residues, supplementing ash and polishing. Adopt environmentally-friendly high-quality paint treatment. The painting room must be a dust-free workshop, and the paint surface coating should be treated with three coats and three bakes, and the coating thickness should be greater than or equal to 35 microns.

?