What is the standard of hotel decoration acceptance procedure?

Public corridor and guest room door: guests use the guest room from the guest room door, which we must keep in mind. Public corridors should be concentrated at the entrance of guest rooms (purposeful lighting). The external corner of the door frame and the side wall of the door are easy to be damaged and need to be protected in design. The steel door frame should be a good way, without deformation and impact resistance. In addition, the design of doors should focus on performance, which is related to the intercommunication of design languages such as indoor wooden furniture or color. The width of the door leaf should be 880-900 mm, if it can't be reached, we must grasp the scale when designing furniture. ● Indoor porch area: A small corridor with the width of1.0-1.2 meters will be formed at the entrance in the conventional guest room architectural design, and a closet with a wall will be at the back of the door. We suggest that, if possible, the wardrobe should be arranged on one side of the sleeping area, which will be very convenient for guests and solve the problems of narrow space in the door, too many accommodating functions and inconvenient use. Of course, porch wardrobes can also be made, especially in rooms with small space. Some economical rooms with less investment can even omit the wardrobe door. Only one use "cavity" is left, and luggage can be directly put in, which is convenient and economical. High-end business rooms, you can also add grooming and bring your own dining table in this area. The depth of the desktop is 30 cm. Guests can also put some odds and ends, which is a thoughtful functional design. ● Work area: centered on the desk. Furniture design has become the soul of this field. Powerful and perfect business functions are vividly reflected here. Broadband, fax, telephone and all kinds of sockets should be placed neatly one by one, and messy wires should be stored clean. The location of the desk should also be carefully considered according to the space. Good lighting and sight are very important. You don't have to sit facing the wall like the old guest room. The writing desk in the guest room of Grand Hyatt Hong Kong can be regarded as a model in the new design. (Note: The above is the business hotel mode, and the resort hotel can consider it separately) ● Entertainment and leisure area and conference area: The conference function in the design of business standard rooms in the past gradually weakened. From the guest's point of view, he hopes that the guest room is a private and completely leisure space. There are many inconveniences in bringing visiting guests into the room. From the hotel operator's point of view, it is definitely not as good as receiving guests in the hotel's business premises. The latter produces efficiency, so why not? This change creates space conditions for the improvement of the room, and moves towards more comfortable and pleasant functions. Reading, listening to music and other functions can be added to the design, which changes the single situation that people can only lie in bed and watch TV in the room. ● Bedroom area: This is the largest functional area of the whole room. Bedside table and bedside table become the core problem of design. In order to meet the needs of different guests and facilitate hotel sales, it is suggested that there should be no bedside table or simple desktop device between two beds, and it can be folded away if necessary. As for the centralized control panel, don't mention it again. It is the most outdated equipment in the guest room. The bedside table can be set on both sides of the bed, because its function is very simple, easy to use is the most important, and it must not be too complicated. The back screen and wall of the bed are relatively complete areas in the room, which can be described emphatically. However, it should be noted that the area about 70cm above the bed surface (the position of the guest's head) is easy to get dirty, and antifouling materials should be considered. Dimmable seat lamp or desk lamp (wall lamp is better) is very important for shaping the light environment in sleeping area, and its frequency of use and damage rate are high, which can not be ignored. ● Bathroom: the bathroom space is independent, and the wind, water and electricity systems are intertwined. There are many equipments and small area, so we should follow the principle of ergonomics and do humanized design everywhere. In this regard, it is an international trend to distinguish between dry and wet areas and toilets, avoiding cross-functional and mutual interference. 1. basin area: countertops and cosmetic mirrors are the focus of bathroom design. Pay attention to the quartz lamp lighting above the basin and the wall lamp lighting on both sides or one side of the mirror, both of which are the best. 2. Toilet area: First of all, it is required to have good ventilation and good lighting. A problem that is often overlooked is the location of the telephone and toilet paper rack, which are often installed on the back wall of the toilet, making it inconvenient to use. In addition, the design of ashtrays and small bookshelves will also show the hotel's care. 3. Bathing area: Whether the bathtub is reserved is often the owner's "chicken rib" problem. Most guests don't want to use the bathtub. The bathtub itself also brings many unfavorable factors, such as increased load, increased investment and prolonged building time. Unless the hotel floor and guest room floor need bathtubs, they can be completely replaced by exquisite shower rooms, saving space and reducing investment. In addition, no matter whether the bathtub is used or not, when choosing the wall material of the shower area with shower head, we should carefully use materials that are not easy to clean, such as frosted or matt texture. 4. Other equipment: the bathroom has high humidity and high temperature, and good ventilation equipment is very important. You can choose to install the exhaust hood separately from the fuselage (the panel is on the ceiling and the fuselage is on the wall), which can greatly reduce the running noise and prolong the service life. The wall where the hair dryer is installed is easy to vibrate during use, so you should also pay attention! About the control of the circuit in the guest room, it generally refers to the control of the lighting circuit and switch. Obviously, the old centralized control panel is inconvenient to use and should not be used any more. The requirement of "family" will control the guest room. Home mode-there is a corresponding switch panel control near the corresponding lighting, which is simple and clear, in line with the customer's usage habits.